Panasonic AJ- DCP Operating Instructions Manual

Also see for AJ-DCP: Operating instructions

Panasonic AJ- DCP Operating Instructions Manual Manual pdf 39 page image

39Specifications[GENERAL]Supply voltage: AC 120 V ±10%, 50 – 60 HzPower consumption: 97 WDC supply voltage: 12 VDC power input current: 6.1 AAmbient operating temperature:41°F to 104°F (5°C to 40°C)Ambient operating humidity:10 to 85% (no condensation)Weight:18.04 lb (8.2 kg)Dimensions (WaHaD):8 7/16˝a5 1/4˝a16 15 /16˝ (214a132a430 mm)Recording format:DVCPRO HDRecording video signals:1080i/59.94 Hz, 720p/59.94 Hz, selectableRecording audio signals:48 kHz, 16 bits, 8 channelsRecording tracksO Digital video/audio: helical tracksO Time code: helical tracks (sub-code area)O Cue signal: 1 trackO Control (CTL): 1 trackTape speed:135.28 mm/secRecording time:46 minutes (with AJ-HP46LP)Tape used:Metal tapeFF/REW time:Less than 4 minutes (with AJ-HP46LP)[VIDEO]$ Digital videoSampling frequency:Y : 74.25/1.001 MHzPB/PR : 37.125/1.001 MHzQuantizing:8 bitsVideo compression system:DCT + variable-length codeVideo compression rate:1/6.7Error correction:Reed Solomon product codeVideo recording bit rate:100 Mbps$ Video input connectorsHD serial digital input:BNCa1,(compliant with SMPTE 292M/296M standard)Reference input:Automatic switching between analog compositeand HD tri-level sync (59.94 Hz),BNCa2 (loop-through), 75 Ω ON/OFF switchable$ Video output connectorsHD serial digital outputs:BNCa2(compliant with SMPTE 292M/296M standard)SD serial digital output (down-converter):BNCa1(compliant with SMPTE 259M-C standard)Analog composite outputs (down-converter):BNCa2, VIDEO 1, VIDEO 2 (superimposingON/OFF)$ Video output adjustment rangeHD serial digital output system phase:±0.5 H (±550 samples, 27 ns steps)SD serial digital/composite video output systemphase:±0.5 H (±429 samples, 74 ns steps)Composite video output SC phase:±180°

/ 42

Related manuals for Panasonic AJ-DCP