32Setup Menus603 V-MUTE SEL00000001N-MUTEGRAYFor setting whether to mute the video output signal when a blank part ofthe tape has been detected during playback.0: The video output signal is not muted (the image is frozen).1: The video output signal is muted (the screen is turned gray).620 DOWNCONMODE00000001000200030004FIT_VFIT_HFIT_HV14:913:9For setting the image processing which is to be performed during down-conversion.0: Side cut mode1: Letter-box mode2: Squeeze mode3: Semi letter-box mode 14:94: Semi letter-box mode 13:9While the setting is being adjusted, the sound output will be muted;however this is normal and not indicative of a problem. When theadjustment is finished, sound will be output.672 V OUT SETUP0000000100020003THRUADD22LADD21LADD20LFor setting the setup processing for the composite output signal.0: The original signal is output as is.1: A 7.5% setup is added from line 22 of the output signal and output.2: A 7.5% setup is added from line 21 of the output signal and output.3: A 7.5% setup is added from line 20 of the output signal and output.645 D/C ENH00000001OFFONFor setting whether to enhance the contours during down-conversion.0: The contours are not enhanced.1: The contours are enhanced.673 EDH00000001OFFONFor setting whether to superimpose EDH onto the SD SDI output.0: EDH is not superimposed.1: EDH is superimposed.VIDEOItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingThe underlining denotes the factory mode.