21Display positionThe position of the superimposed display characterscan be changed by setting setup menu items No.004“CHARA H-POS” and No.005 “CHARA V-POS.”(See page 29)Superimposed ScreensWhen the PAGE button and DATA+ button or DATA–button are pressed, the counter display appearstemporarily on the TV monitor while these buttons areheld down to enable the setting to be checked.Even while the PAGE button is pressed, the settingscan be performed using the DATA+ button or DATA–button while the actual status is checked.When the unit’s MONITOR OUT connectors havebeen connected to a TV monitor, the control signals,time codes, etc. can be displayed as abbreviations onthe TV monitor screen.This display can be set to ON or OFF by setting setupmenu item No.002. (See page 29)Display charactersThe background of the superimposed displaycharacters can be changed by setting setup menuitem No.006 “CHARA TYPE.” (See page 29)TCR : : :TV monitorTTCCRR :: :: ::TV monitorTCR : : :TV monitorTCR : : :TV monitorTCR : : :TV monitorAbbreviationsCTL (control signal)TCR (playback value of time code)UBR (playback value of user’s bit)REMAIN (remaining tape)No display: Normally, no display.P : Flashes when the DCsupply voltage hasdropped.S : Flashes in “FAN STOP”status.L : Flashes in “LOW RF”status.N : Flashes in “NO RF”status.