Panasonic AJ-DCP Operating Instructions Manual

36700 CH1 IN LV 00000001000200034dB0dB–3dB–20dBFor setting the audio input (CH1) reference level.701 CH2 IN LV 00000001000200034dB0dB–3dB–20dBFor setting the audio input (CH2) reference level.702 CH1 OUT LV 00000001000200034dB0dB–3dB–20dBFor setting the audio output (CH1) reference level.703 CH2 OUT LV 00000001000200034dB0dB–3dB–20dBFor setting the audio output (CH2) reference level.704 EMPHASIS 00000001OFFONFor setting emphasis ON or OFF.705 MONI SEL00000001PLY PCMPLY CUEFor setting the audio signals during playback.0: PCM audio signals are output.1: CUE audio signals are output.706 REC CUE000000010002For setting the audio input signals which are to be recorded on the cuetrack.0: CH1 input signals are recorded.1: CH2 input signals are recorded.2: CH1 and CH2 input signals are mixed and recorded.707 PB FADE000000010002For setting the monitor output and headphone output sound duringplayback.0: The sound complies with the status during recording.1: The sound is forcibly cut.2: The sound is forcibly faded.708 MONITOR MIX00000001STEREOCH1+2709 H.PHONE MIX00000001STEREOCH1+2For setting the headphone output. (This function works when the audiomonitor selector switch on the front panel is set to the ST position.)0: The sound is output in stereo.1: The sound is mixed (when monaural headphones are used).710 CUE OUT SEL00000001OFFONFor setting whether the analog cue signals are to be output to the audiooutput (main line system).0: The analog cue signals are not output.PCM audio signals are output during playback; no sound is output in allother modes.1: The analog cue signals are output.PCM audio signals are output during playback; analog cue signals areoutput in all other modes.AUDIO menuItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingThe underlining indicates the factory setting.Setup MenusFor setting the audio monitor output method. (This function works when theaudio monitor selector switch on the front panel is set to the ST position.)0: The sound is output in stereo (with the left channel sound from the Lconnector and right channel sound from the R connector).1: The sound is mixed (and mixed sound is output at both connectors).CH1CH2CH1+2AUTOCUTFADE