Panasonic AJ-DCP Operating Instructions Manual

25How to load the user defaultsSet the LOCAL/MENU/REMOTE switch to theMENU position.The unit is now set to the menu setting mode,and the menu screen appears on the videomonitor.1Press the RESET button.The unit is set to the default setting mode, andthe default setting screen appears on the videomonitor.2Press the MENU-UP button or MENU-DOWNbutton to move the cursor to the LOADposition, and press the SET button.The unit is set to the LOAD mode, and the loadscreen appears on the video monitor.3SELECT MODE0 ESCAPE1 LOAD2 SAVE3 PROTECTSET–UP MENU NOFACTORY (ALL)FACTORY (NOT SYSTEM)USER (ALL)USER (NOT SYSTEM)Press the MENU-UP button or MENU-DOWNbutton to move the cursor to USER (ALL), andpress the SET button.O If this operation is performed with the cursormoved to USER (NOT SYSTEM) instead,operation will be performed on the basis of allthe user settings saved in the memory exceptfor the SYSTEM menu settings.O If this operation is performed with the cursormoved to NO, no change is made to the usersettings saved in the memory, and operation isreturned to the menu screen.4Set the LOCAL/MENU/REMOTE switch to theLOCAL or REMOTE position.This completes the menu settings.5How to protect the menusSet the LOCAL/MENU/REMOTE switch to theMENU position.The unit is now set to the menu setting mode,and the menu screen appears on the videomonitor.1Opening the setup menu can be prevented even whenthe LOCAL/MENU/REMOTE switch on the front panelis set to the MENU position by setting the unit to themenu protect mode.Press the RESET button.The unit is set to the default setting mode, andthe default setting screen appears on the videomonitor.23SELECT MODE0 ESCAPE1 LOAD2 SAVE3 PROTECTMENU PROTECT OK?NOYESPress the MENU-UP button or MENU-DOWNbutton to move the cursor to the YESposition, and press the SET button.The menu screen is now displayed.4Setup (Initial Settings)Press the MENU-UP button or MENU-DOWNbutton to move the cursor to the PROTECTposition, and press the SET button.The unit is set to the menu protect setting mode,and a screen for checking whether to protect themenus appears on the video monitor.