Panasonic AJ-DCP Operating Instructions Manual

31111 AFTER CUE-UP00000001STOPSTILLFor setting the status after cue-up.0: For stopping the tape in the stop mode.1: For stopping the tape in the still mode.115 EJECT EE SEL00000001EEBLACKFor selecting the video output and audio output while the tape was beingejected when the TAPE/EE switch has been set to TAPE.0: The E-E picture and E-E sound are output.1: The E-E picture and E-E sound are muted.112 CAP LOCK000000012F4FFor setting the capstan lock mode.0: Capstan locks at 2F.1: Capstan locks at 4F.OPERATION menuItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingThe underlining indicates the factory setting.200 ID SEL00000001OTHERDVCPROFor setting the ID information to be returned to the controller.0: 20 25H is returned.1: The DVCPRO unit’s own ID (F0 33H) is returned.INTERFACE menuItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingThe underlining indicates the factory setting.Setup Menus110 AUTO BACK000000010002OFFREC-PALLFor setting the operating method in the no-gap mode.(Specifies whether or not to use the AUTO BACK function, which rewindsthe tape for a few seconds to eliminate gaps and distortion betweensegments.)0: No AUTO BACK function.1: Auto back is performed when switching to the REC PAUSE mode, afterwhich the unit remains in REC PAUSE status. (When PAUSE iscancelled, the tape is advanced and then recording starts.)2: In addition to the functions of setting 0001 “REC-P,” AUTO BACK isperformed when switching to the REC PLAY mode, immediately afterwhich the tape is advanced and recording starts.113 BATTERY SEL000000010002NiCd-12NiCd-13NiCd-14For setting the type of battery.0: 12V battery1: 13V battery2: 14V battery114 FRZ MODE SEL00000001DISSTBOFFFor selecting the output picture in the STANDBY OFF (HALF LOADING)mode when the TAPE/EE switch has been set to TAPE.0: The output picture is muted.1: The playback picture is frozen for output as soon as the STANDBY OFF(HALF LOADING) mode is established.109 MEMORY STOP00000001OFFONFor setting whether to stop the tape when the CTL counter readingbecomes zero during fast forwarding or rewinding. (This item functions onlyin the CTL mode.)0: The tape is not stopped.1: The tape is stopped.