Panasonic AJ-DCP Operating Instructions Manual

35600 OUT VSYNC00000001N-VFVFFor setting whether to float the vertical sync position of the video output inorder to input the video output phase during E-E mode recording.0: Vertical sync position is not floated.1: Vertical sync position is floated.601 V-MUTE SEL00000001N-MUTELOW RFFor setting whether to mute the video signals when LOW RF or NO RF hasoccurred during playback.0: The video signals are not muted (the picture is frozen).1: The video signal picture is muted (the screen goes blank).602 CC (F1) BLANK00000001BLANKTHRUFor setting ON or OFF for the closed caption signals in field No.1.0: Signals are forcibly blanked.1: Signals are not blanked.603 CC (F2) BLANK00000001BLANKTHRUFor setting ON or OFF for the closed caption signals in field No.2.0: Signals are forcibly blanked.1: Signals are not blanked.604 FREEZE SEL000000010002FIELD1FIELD2FRAMEFor setting the freeze mode of still pictures.0: Field freeze (field No.1)1: Field freeze (field No.2)2: Frame freeze606 INPUT C KILL00000001B/WAUTOFor setting the color killer processing for the video input signals.0: The video signals are forcibly set to the black-and-white mode.1: The video signals are processed automatically.622 SETUP 25 For setting 7.5% setup processing to be performed on input and outputsignals in the 25 Mbps mode.(The 00 and 01 settings on the submenu can be displayed by pressing theMODE button.)607 IN FRM DET00000001FORCEDAUTOFor setting frame detection processing during input.0: Frame detection is performed all the time.1: Frame detection is prohibited when non-standard color signals are input.00 CMPST IN00000001THRUCUTThis selects the 7.5% setup processing for the input composite signal.0: The signal is recorded in its original form.1: The signal is recorded with the 7.5% setup removed.01 CMPST OUT00000001THRUADDThis selects the 7.5% setup processing for the output composite signal.0: The signal is output in its original form.1: The signal is output with the 7.5% setup added.623 SETUP 50 For setting 7.5% setup processing to be performed on input and outputsignals in the 50 Mbps mode.(The 00 and 01 settings on the submenu can be displayed by pressing theMODE button.)00 CMPST IN00000001THRUCUTThis selects the 7.5% setup processing for the input composite signal.0: The signal is recorded in its original form.1: The signal is recorded with the 7.5% setup removed.01 CMPST OUT00000001THRUADDThis selects the 7.5% setup processing for the output composite signal.0: The signal is output in its original form.1: The signal is output with the 7.5% setup added.605 EDH00000001OFFONFor setting whether to superimpose EDH onto the serial output.(This function works when the optional SDI input/output board has beeninstalled. When it has not been installed, “N/A” is displayed, and thefunction does not work.)0: EDH is not superimposed.1: EDH is superimposed.VIDEO menuItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingThe underlining indicates the factory setting.Setup Menus