Panasonic AJ-DCP Operating Instructions Manual

27SYSTEM menuItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of setting00 ENCODER SEL00000001REMOTELOCALFor setting whether the encoder adjustments (for the analog video outputsignals) are to be performed by the external encoder remote controller orthe unit.0: Adjustments are performed by the external encoder remote controller.1: Adjustments are performed by the unit.The underlining indicates the factory setting.01 VIDEO LEVEL 000001280255–1280127For setting the video level as part of the encoder adjustments performed bythe unit.Maximum variation range: ±3 dB02 SET UP 000001280255–1280127For setting the setup amount as part of the encoder adjustments performedby the unit.Maximum variation range: 10 IRE03 HUE 000001280255–1280127For setting the hue as part of the encoder adjustments performed by theunit.Maximum variation range: ±25 degrees04 CHROMA LEVEL 000001280255–1280127For setting the chroma level as part of the encoder adjustments performedby the unit.Maximum variation range: ±3 dB05 SYSTEM H 00000255–128127For setting the horizontal phase as part of the encoder adjustmentsperformed by the unit.Maximum variation range: ±8 μs07 SC FINE 00000255–128127For finely adjusting SC PHASE as part of the encoder adjustmentsperformed by the unit.Maximum variation range: ±45 degreesTogether with the SC COARSE adjustment, 360 degrees are covered.06 SC COARSE 0000000100020003090180270For coarsely adjusting SC COARSE as part of the encoder adjustmentsperformed by the unit.Variation range: 4 positions of 90 degrees each08 SCH COARSE 0000000100020003090180270For coarsely adjusting SCH.Variation range: 4 positions of 90 degrees eachO Item No. 01, 02, 03 and 04 are initialized only when “ALL” is selected for the initialization operation.O The ( ) setting items are not initialized by the regular menu resetting operation.Setup Menus