Editing: Creating Playlists 109EditingThe registered events can be exported to a P2 card, harddisk, or FTP server. When being exported, the playlist file isalso created automatically in the export destination.1 Press the PLAY LIST button to open the playlistscreen.2 Press the MENU button.3 Use the cursor buttons to choose [OPERATION] –[PLAYLIST EXPORT] and press the SET button.4 Select the destination for export and press the SETbutton.To export to a hard disk or FTP server, select the details forthe destination.➝ For details on the hard disk or FTP server, refer to“Using This Unit With a Hard Disk” (page 126) or“Connecting This Unit to a Network” (page 139).5 Select [YES] in the confirmation dialog and press theSET button.◆ NOTE:• The entire area of source clips cannot be exported. Only thearea referenced on the timeline and the area within two secondsbefore and after the referenced area is exported separately. Ifthe data are less than two seconds before and after thereference area, the actual area is exported.• When there is not enough space to store the expected size ofthe clip created upon export, “LACK OF REC CAPACITY!”appears, and export will not start. If the destination is an FTPserver, export starts, and a warning will appear once there is nospace left in the FTP server.• Export can be made to multiple P2 cards. If the specified carddoes not have enough space to store all the data, the remainingdata are automatically exported to the P2 card in the next slot.The numbers of the slots where the data are exported aredisplayed during exporting and when exporting ends.• To cancel an ongoing export operation, use the SET button orthe CANCEL (SHIFT + EXIT) button to select [YES] and pressthe SET button.• Export is not available for events without video (a video eventindicated in a red frame or a blank space).• Do not remove a P2 card for which export is being executed andthe LED of the card slot flashes.Exporting a Playlist
