178 Setup: Item SettingsItem SettingsThe system menu specifies HD SDI and SD SDI outputs, analog composite output, phase adjustment of audio output, systemfrequency, phase of SD REF input of HD SDI output, and system file lock.• XX indicates factory default settings.SYSTEMItem SettingSettings and brief function descriptionFRNo.SUPERDISP.FRNo.SUPERDISP.05 ENCODER SEL00010002LOCALBOTHDetermines whether video output signal adjustments will be made on this unit or on anexternal encoder remote controller.LOCAL: Video output signal adjustments are performed on this unit.BOTH: Video output signal adjustments are either performed on this unit or on an encoderremote controller.NOTE:• An RS-422A digital controller is available as an encoder remote controller.• For details on adjustments, refer to “Video Output Signal Adjustments” (page 180).• When adjustments are made on an external encoder remote controller, theadjustment values are reflected to adjustment parameters in setup menus. Note thatit takes 1 min after completing adjustments for values reflected to adjustmentparameters to be saved. Thus when adjustments using an external encoder remotecontroller are completed, wait 1 minute or more before turning off the unit.12 SYS H(HD)0000|1375|2750–1375|0|1375Adjusts system phase of a HD SDI output (in 13.5 ns steps).–: Advances the phase.+: Delays the phase.NOTE:• A reset does not return this setting to its factory default.• An item that flashes can be returned to its factory default by pressing the RESETbutton.14 SYS SC(SD)0000|0128|0255–128|0|127Adjusts the system phase of the analog composite output and SD SDI output (totalvariable range: ±180°).NOTE:• A reset does not return this setting to its factory default.• An item that flashes can be returned to its factory default by pressing the RESETbutton.15 SYS H(SD)0000|0864|1728–864|0|864Adjusts system phase of analog composite output and SD SDI output (in 37 ns steps).–: Advances the phase.+: Delays the phase.NOTE:• A reset does not return this setting to its factory default.• An item that flashes can be returned to its factory default by pressing the RESETbutton.18 SCH COAR(SD)0000000100020003090180270Adjusts the SCH phase of analog composite output (four 90° positions).Changes the SC phase but not the H phase.59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz only59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz only59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz only
