74 Clip Management: Attaching Metadata to ClipsThe counter value is indicated as a four-digit number. Whenrecording method “TYPE 2” is selected for the USER CLIPNAME in the clip metadata that is loaded, the counter value isincremented by 1 for each new recording and a new clip isgenerated.■ To reset the counter valueUse the following procedure to reset the counter value.1. Open the thumbnail screen.2. Press the MENU button.3. Use the cursor buttons to choose [META DATA] –[PROPERTY] – [USER CLIP NAME] and press theSET button.4. Use the cursor buttons to select [COUNT RESET]and press the SET button.The counter value is reset to 1.5. Press the EXIT button to end processing.■ Incrementing the counter value of the USERCLIP NAME for clips exceeding 4 GBIn the following case, one shot is recorded as multiple clipsand the counter value is automatically incremented andrecorded for each shot.• When an 8 GB or larger P2 card is used in this unit and eachcontinuous recording exceeds a preset time.➝For details, refer to “Dividing clips over 4 GB in length”(page 42)• When one recording spans multiple cards.A P2 device will indicate the thumbnail and the counter valueof clip 1 when thumbnails and property of the clip aredisplayed.Use the following procedure to load metadata from an SDmemory card.1 Insert the SD memory card storing the metadataupload file.2 Open the thumbnail screen.3 Press the MENU button.Counter valueLoading Set Metadata ValuesExample of a recording on one P2 card (DVCPRO HD):Example of recording a clip on two P2 cards:REC start(start of recording)Stop(recording stop)Recording duration = 6 minutesREC start(start of recording)Stop(recording stop)Clip 1Counter value = AClip 2Counter value = A + 1Clip 1Counter value = AClip 2Counter value = A + 1Approx. 5 min. Approx.1 min.1st card 2nd card
