32 Introduction: Control Reference Guide1. Level meterIndicates the levels of audio signals for CH1, CH2,CH3 and CH4 (when setup menu No.767 (METERSELECT) is set to CH1-4.When setup menu No.767 (METER SELECT) is set toCH5-8, the levels of audio signals for CH5, CH6, CH7and CH8 are displayed.It indicates the input signal level of audio signalsduring recording and when EE is selected. Duringplayback the meter indicates output signal levels.Use the METER FULL/FINE selector button to switchthe audio level indication to FULL mode or FINE mode.2. REMOTE lampLights when REMOTE status is engaged with theREMOTE button.3. TV system displayIndicates the selected TV system. Use the SYSTEMsetting No. 25 (SYSTEM FREQ) setup menu to switchbetween 59.94 Hz or 50 Hz.4. Input selection displaySelected input for VIDEO and AUDIO are indicated.When there is no signal input excluding analog audio,the display blinks.When SDI input is selected, the display also blinks ifthe input signal does not match the system format.VIDEOAUDIO*1 “AES/EBU” blinks when no recordable signal, according tothe system settings, is input.LCD PanelVIDEOCMPSTSDISG12AUDIOANALOGAES/EBUSDISGCH-1 CH-2 CH-3 CH-4CH-5 CH-6 CH-7 CH-8dB0-4-8- 12- 16- 20- 25- 30 CTLTCUB-UINHWIDERECREMOTE59.9429.9723.982425501080i 720pDVCPROAVCHDL R L R L R L R50dB0-4-8- 12-16-20-25-30-dB0-4-8- 12- 16- 20- 25- 30-dB0-4-8- 12- 16- 20- 25- 30-SYSTEM5 7632 418 9 10CH-1L RCH-1L RdB0-4-8- 12-16-20-25-30-FINE mode FULL mode59.94: Lights when a 59.94 Hz system frequencyis selected.29.97: Lights when a 29.97 Hz system frequencyis selected.23.98: Lights when 23.98, 59-23 Hz systemfrequencies are selected.24: Lights when 24, 60-24 Hz systemfrequencies are selected.25: Lights when 25, 60-25 Hz systemfrequencies are selected.50: Lights when a 50 Hz system frequency isselected.CMPST: Analog composite video input signalSDI: Serial digital video input signalSG: Internal reference signalANALOG: Analog audio input signalAES/EBU*1: 8-channel digital audio input signalSDI: Serial digital audio input signalSG: Internal reference signal
