134 Manipulating Clips with Thumbnails: Deleting Clips1 Select a desired text memo in a clip by carrying outsteps 1-3 for [Playing back a clip at the position where atext memo is recorded] (page 133).2 Move the pointer to the desired text memo, and thenpress the SET button. You can select more than one textmemo.3 Press the THUMBNAIL MENU button to selectOPERATION ! COPY.4 Use the cursor buttons and SET buttons to select thedestination slot. Then, select YES to start copying theclip. The portion between the selected text memo andthe next one is copied. If no text memo is found after theselected one, then all part after the selected text memois copied. If multiple text memos are selected, theselected sections are copied.5 When the clip is being copied, the unit indicates theprogress of the copy process and cancellation status. Todiscontinue the copy process, press the SET button.Then, a YES/NO confirmation screen is displayed. Usethe cursor buttons and SET button to select YES.#NoteWhen copying between text memos, the copied section maybe automatically adjusted depending on the unit framenumber of the employed recording methods.If the section to be copied is smaller than the unit framenumber, the copy cannot be performed. For more aboutrecording methods and unit frame numbers, refer to thetable on page 44.1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Use the cursor buttons to move the pointer over the clipyou want to delete.Press the SET button to select the clip.3 Press the THUMBNAIL MENU button and selectOPERATION ! DELETE from the thumbnail menu.4 The following screen appears. Use the cursor buttonsand the SET button to select YES.5 The clip is deleted. All selected clips (in blue frames) aredeleted by this operation.#NotePressing the SET button stops the deletion operation in themiddle.Using a text memo to break a clip and copy the necessary portionDeleting Clips!"#$%&'())*#+,-.+/012345677899.'O9:;<99=>>?@A>BACDEFGDEHIJKL?M
