65Adjustments and Settings for Recording: Setting Time DataAdjustments and Settings for RecordingThe user bits (UB) to be recorded in the sub-code area areselected through the menu option UB MODE. The user bits(VITC UB) to be recorded in the VIDEO AUX area areselected through the menu option VITC UB MODE.USER (UB MODE only)The included user value is recorded. A user value isinput through the display window. For more informationabout how to input a user value, see [Inputting a uservalue] (page 65). The recorded user value is retainedeven if the power is turned off.TIMEThe time kept by the built-in clock is recorded.DATEThe hour digits for date and time kept by the built-inclock are recorded.EXT (UB MODE only)The user bits value input through the TC IN connector isrecorded.The included user’s value will also be this input value.TCGThe time code value is recorded.FRM RATEThe frame rate information for camera shooting isrecorded. For more information, see [Frame rateinformation recorded in user bits] (page 66).REGENThe user bits last recorded on the current target P2 cardis read and recorded as is.USER/EXT (VITC UB MODE only)The included user’s value is recorded as the user bitsfor the VIDEO AUX area. It is the same value as theuser bits indicated when the option UB MODE is set to“USER” or “EXT”.a. HOLD switchb. DISPLAY switchc. Display windowd. TCG switche. Cursor and SET buttons1 Position the DISPLAY switch at [UB].2 Position the TCG switch at [SET].When the left digit starts blinking you can change thevalue.3 Use cursor buttons to set the user bits.$ button:Shifts the target (blinking) digit to the right.% button:Shifts the target (blinking) digit to the left.& button:Advances the blinking number by one digit.' button:Winds back the blinking number by one digit.4 Position the TCG switch at [F-RUN] or [R-RUN].5 Go to the screen from the MAIN OPERATIONpage, and set the menu option UB MODE to “USER”.#Notes" When the TCG switch is positioned at [SET], thumbnailscannot be manipulated." To confirm VITC UB, press the HOLD switch to displayVTCG on the display window.Setting of the user bitsInputting a user valueabcde!"#$%&'())*#+,-.+/012345677899/P9:;<99=>>?@A>BACDEFGDEHIJKL?M
