139Manipulating Clips with Thumbnails: Setting of Clip Meta DataManipulating Clips with ThumbnailsSelect META DATA ! USER CLIP NAME from thethumbnail menu to select the recording method. Two optionsare available: TYPE1 and TYPE2.#NoteWhen a P2 card with a memory capacity of 8 GB or more isused in unit and a one-time continuous recording exceedsthe prescribed duration (DVCPRO HD and the AVC-Intra100: about 5 minutes; AVC-Intra50: about 10 minutes)or when a one-time recording extends over more than oneP2 card, the recording concerned will automatically beundertaken as a separate clip. At this time, each clip will beprovided with its own COUNT value.Example of recording (DVCPRO HD) a clip on one P2 card:Example of recording a clip on two P2 cards:If the clip thumbnails are displayed as shown in the exampleabove or their properties are indicated using a P2 device,the thumbnail and COUNT value of clip 1 will be displayed.Select META DATA ! INITIALIZE from the thumbnail menu,and press the SET button. Select YES when theconfirmation screen is displayed.#Notes" Japanese or Chinese characters indicated in English orother characters that cannot be indicated in English willnot display properly; they will be indicated as '." The letters which can be input with the unit are only thealphanumeric. The unit cannot input Japanese andChinese.Selecting the USER CLIP NAME recordingmethod" TYPE1 (Factory setting)USER CLIP NAME to berecordedIf clip metadata has been read in Uploaded dataIf no clip metadata has been readin or if the setting for recordingclip metadata has been turned offSame as GLOBAL CLIP ID(UMID data)" TYPE2USER CLIP NAME to berecordedIf clip metadata has been read in Uploaded data + COUNTvalue*If no clip metadata has been readin or if the setting for recordingclip metadata has been turned offSame as CLIP NAME* The COUNT value is indicated as a four-digit number.The COUNT value is incremented each time a new clip iscaptured if clip metadata has been read in and TYPE2 hasbeen selected as the recording method.The COUNT value can be reset using the followingprocedure.Select META DATA ! PROPERTY from the thumbnailmenu, then select USER CLIP NAME to display the menushown below. Select “COUNT RESET” with the cursor andpress the SET button to reset the COUNT value to 1.Clear the uploaded metadataRecording start Recording pauseRecording duration = Approx. 7 minClip 1COUNT value = 0001Clip 2COUNT value = 0002Approx. 5 min Approx. 2 minRecording start Recording pauseClip 1COUNT value = 0003Clip 2COUNT value = 00041st card 2nd card!"#$%&'())*#+,-.+/012345677899.'Q9:;<99=>>?@A>BACDEFGDEHIJKL?M
