73Adjustments and Settings for Recording: Setting Time DataAdjustments and Settings for RecordingThe camera ID is specified through the screen.The ID can include up to 10 alphanumeric characters,symbols, and/or spaces.#NoteWhen the settings menu is displayed, outputting color barsignals does not indicate the camera ID.1 Go to the screen from the CAMOPERATION page.2 Turn the jog dial button to move the arrow (cursor) tooptions ID1: - ID3:.3 Press the jog dial button. The arrow (cursor) moves tothe ID entry area, allowing you to enter an ID.4 Turn the jog dial button until a desired characterappears. The characters that appear are switched in thefollowing order:5 Press the jog dial button to accept a desired character.6 Turn the jog dial button to move the arrow (cursor) to thenext digit (clockwise), and repeat steps 4 - 5 to setcharacters.To change an input character, turn the jog dial button tomove the arrow (cursor) to the appropriate characterand carry out steps 4 and 5.7 When all the characters are set, turn the jog dial buttonto move the arrow (cursor) to : .8 Pressing the jog dial button brings the arrow (cursor)back to the options ID1: - ID3:.9 To exit the menu, press the MENU button.#Notes" When the menu option CAMERA ID is set to “BAR”,the camera ID is recorded together with color barsignals.This menu option is accessible from the INDICATOR1> screen on the VF page." The ID POSITION menu option can be used to selecta position where the camera ID is superimposed onthe color bar. The ID POSITION option can beaccessed through the screen onthe VF page." When the TIME/DATE menu option is set to “ON”, thecamera ID along with the date and time informationare superimposed on the color bar. The TIME/DATEoption can be accessed through the INDICATOR1> screen on the VF page.Providing an ID to the CameraSpace: "#Alphabetical characters: A to Z#Numerals: 0 to 9#Symbols: ', >, <, /, - !"#$%&'())*#+,-.+/012345677899('9:;<99=>>?@A>BACDEFGDEHIJKL?M
