Installing a Server Certificate[CA Certificate ‑ CA Certificate install]• A server certificate (security certificate) cannot be installed if aCertificate Signing Request (CSR) has not been generated.• The server certificate must have been issued by the CertificateAuthority (CA) in order to install it.1. Click the [Browse] button in [CA Certificate ‑ CACertificate install].The [Open File] dialog is displayed.2. Select the server certificate file and click [Open]. Thenclick the [Execute] button.The server certificate is installed.• The name of the host registered to the installed server certificateis displayed in [CA Certificate] - [Information]. The following is alsodisplayed depending on the status of the server certificate.Displayed content DescriptionInvalid When the server certificate is not installed[Common Name] ofserver certificateWhen the server certificate is alreadyinstalled and enabledExpired When the effective period of the servercertificate has expired• When the [Confirm] button is clicked, the content of the installedserver certificate (security certificate) is displayed in the [CACertificate - Confirm] dialog. (An asterisk is displayed in the[Organizational Unit] field only.)• Click the [Delete] button to delete the installed server certificate(security certificate).• When [HTTPS] is selected in [Connection], the server certificate(security certificate) cannot be deleted.• Perform STEP 1 to STEP 2 to update a server certificate.• To delete an enabled server certificate (security certificate),confirm that there is a backup to the said certificate in yourpersonal computer or recording media. A server certificate (securitycertificate) will be needed to reinstall it.• The HTTPS function can no longer be used when the effectiveperiod of the server certificate has expired. In such a case, theconnection method is changed to HTTP when the unit is restarted.Update the server certificate before its effective period expires.• The effective period of the server certificate can be confirmed bydouble-clicking the server certificate file issued by the CertificateAuthority (CA). Setting the Connection Method[Connection]1. Set the method to access the camera in [Connection].HTTP: Only HTTP connection is possible.HTTPS: Only HTTPS connection is possible.• When using an HTTPS connection, network connection with theAW-RP120, AW-RP50, and AK-HRP200 will be disabled.2. Set the Port No. to be used with HTTPS in [HTTPS port].Port No. that can be selected: 1 to 65535The following port numbers are used by the unit so they cannot beused.20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 554, 995,10669, 10670, 59000 to 61000Factory settings: 4433. Click the [Set] button.The camera restarts and access to the camera via HTTPS is enabled.• This unit will restart if the connection method is changed.• Using a self‑signed certificateA warning screen is displayed when accessing the camera byHTTPS for the first time. Install the self-signed certificate (securitycertificate) in your personal computer in accordance with the screeninstructions. (→ page 120)• Using a server certificateInstall the Certificate Authority (CA) root certificate or intermediatecertificate in your web browser in advance. Follow the CertificateAuthority (CA) procedures to acquire and install root certificates andintermediate certificates.• When accessing the camera by HTTPS, the image display speedand frame rate of the moving image may reduce.• When accessing the camera by HTTPS, it may take some time forthe images to be displayed.• When accessing the camera by HTTPS, images may be disturbedand sound may be interrupted.• The maximum number of cameras that can be connectedsimultaneously depends on the maximum image size anddistribution format. Accessing the Camera by HTTPS1. Launch the web browser in your personal computer.2. Input the camera’s IP address in the address bar of theweb browser.Input address: https://192.168.0.10/• When the HTTPS port No. is changed from “443”, input “https://camera IP address: Port No.” in the address bar.E.g. https://192.168.0.11:61443• When this unit is in a local network, set a proxy server from the webbrowser (menu bar: [Tools] - [Internet Options]) to ensure that aproxy server is not used for a local address.3. Press the [Enter] key.The live screen [Live] is displayed.The security certificate is installed when the security warning screenis displayed. (→ page 120)When [User auth.] is set to [On], the user name and password inputscreen is displayed before the live screen [Live] appears.• When HTTPS is used, screen and image display may slow downand image update interval (frame rate) may also slow down.119Web screen configurations (continued)
