z Updating the firmwarePerform the following to update the firmware.1. After consulting with your dealer, download the latestsoftware to the hard disk of your personal computer.• No spaces or full-size characters can be used for the directory inwhich the software will be stored.• Keep the maximum combined number of characters to be used forthe name of the directory in which the software will be stored and forthe name of the software which has been downloaded to less than250 characters.2. Click the [Browse] button, and specify the downloadedsoftware.3. Click the [Execute] button.The software upgrade check screen is displayed.After upgrading the software version, be absolutely sure to delete thetemporary Internet files.• Be absolutely sure to upgrade the software versions from thepersonal computer in the same network (LAN) as the unit whosefirmware version is to be updated.• After the [Execute] button is pressed, the amount of time it takes forthe version upgrade progress bar to appear is about 1 minute for theCamera Main software or about 3 minutes for the Network softwareor AVIO FPGA. The progress bar wil appear within 1 minute for otherfirmware.• Use the personal computer on the same subnet as the camera toupgrade the software version.• Before using the version upgrading software, be absolutely sure tocheck the precautions to be observed with your dealer, and follow thedealer’s instructions.• Use the following files specified by Panasonic Corporation as thesoftware used for version upgrading.CPU Software Interface .sif filesCPU Software CameraMain .scm filesCPU Software Servo .spt filesCPU Software Network .snw filesEEPROM Interface .eep filesFPGA Lens .fls filesFPGA AVIO .fav files• Do not turn off the unit’s power while upgrading a software version.(Do not turn off the power until the progress bar display is cleared.)• While a software version is being upgraded, do not attempt to executeany other operations until the version has been upgraded. Reset settings screen [Default reset]The unit’s setting data is initialized and the unit is restarted on thisscreen.Reset to the default (Except the network settings)When the [Execute] button is clicked, the unit’s settings are returnedto their defaults.The login user name and password will also return to their defaults(admin/12345).When the initialization operation is started, no operations can beundertaken for about 3 minutes.• The following setting items will not be returned to defaults.- All settings under [IPv4 network]- All settings under [IPv6 network]- [HTTP port]- [HTTPS - Connection]- [HTTPS - HTTPS port]- HTTPS: CRT key, server certificate- All settings under [UPnP]- [Line speed]- [Bandwidth control(bit rate)]• [AWB] and [ABB] adjustment values will not be returned to defaults.RebootWhen the [Execute] button is clicked, the unit is rebooted.After the unit has been rebooted, no operations can be undertaken forabout 2 minutes as is the case when the unit’s power is turned on.123Web screen configurations (continued)
