Panasonic AW-UE150WP Operating Instructions Manual

Also see for AW-UE150KE: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

z OthersThis item’s setting is reflected when the [Set] button is pressed.Install Position“Desktop” or “Hanging” is selected here as the method used to installthe unit.Setting value:Desktop Stand-alone installationHanging Suspended installationFactory settings: Desktop• When [Hanging] has been selected, the top, bottom, left and rightof the images will be reversed, and up/down/left/right control forpanning and tilting will also be reversed.Smart picture flipWhen this is set to [Auto] and the tilt becomes the angle set for[Flip detect angle], the image will be flipped in the vertical directionautomatically.Setting value:Off Does not flip the image vertically.Auto When the tilt becomes the angle set for [Flip detect angle], theimage will be flipped in the vertical direction automatically.Factory settings: OffFlip Detect AngleSet the tilt angle at which the image will be flipped in the verticaldirection automatically when [Smart Picture Flip] is set to [Auto].Setting range: 60° to 120°Factory settings: 90°Preset Speed TableSet the preset speed table (Slow, Fast).During preset playback, presets are performed at [Preset Speed] (1 to30) values that are based on the table set here.Setting value: Slow/FastFactory settings: FastPreset SpeedSet the pan/tilt movement speed used when recalling cameraorientation information registered to the preset memory (30 steps).Setting range: 1 to 30Factory settings: 20• When you set large Preset Speed values, the image may swaywhen the movement stops.• When [Preset Speed Table] is set to [Fast], [Preset Speed] valuesequivalent to the AW-HE120 will be applied.Preset ScopeSelected here are the setting items to be recalled when the contentsof the preset memory are regenerated.Setting value:Mode A Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain,white balance adjustment valueMode B Pan, Tilt, Zoom (including digital zoom), Focus, IrisMode C Pan, Tilt, Zoom (including digital zoom), FocusFactory settings: Mode APreset D‑ExtenderTurns the preset digital extender function off/on.When set to [On], the digital extender function configuration will berecalled when regenerating the preset memory. When set to [Off],the digital extender function configuration will not be recalled whenstoring the preset memory.Setting value: Off/OnFactory settings: OffFreeze During PresetTurn the function for freezing images during preset playback off/on.When this is set to [On], preset playback is performed with a still ofthe image immediately preceding the start of preset playback beingoutput. The image freeze is released when preset playback is finished.Setting value: Off/OnFactory settings: OffSpeed with zoom position“Off” or “On” is set here for the function used to adjust the pan-tiltadjustment speed in conjunction with the zoom magnification.When [On] is set, the panning and tilting operations will becomeslower in the zoom status.This function has no effect during preset operations.Setting value: Off/OnFactory settings: OnFocus ModeSelect auto or manual mode for the focus adjustment function.Setting value:Auto Always adjust focus automatically.Manual Adjust focus manually.Factory settings: Auto• [Focus Mode] cannot be set to [Auto] when [Frame Mix] is set to[18dB] or [24dB].Focus adjust with PTZ“Off” or “On” is set here for the function which compensates for out-of-focusing when it occurs during panning, tilting or zooming operations.When [Off] is set, adjust the focus as required after zooming or setthe focus to the auto mode.This item can be selected only when [Manual] has been selected asthe [Focus Mode] setting.Setting value:Off Out-of-focusing is not compensated.On Out-of-focusing is compensated.Factory settings: Off88Web screen configurations (continued)