Camera menu itemsSetting the camera menu itemsCamera menus are displayed on the monitor when the unit’s settings areto be selected.The monitor is connected to the MONITOR OUT connector OUT>.The basic camera menu operations involve displaying sub-menus fromthe Top Menu items, and selecting settings on the sub-menus.Some sub-menus have menu items for performing more detailedsettings.For details on the “Basic setup operations” to display the cameramenus and change the items using the controller (AW-RP150), refer topage 41.The “ ” and “ ” marks in the menu titles indicate the hierarchical levelof the menu currently displayed.For instance, “ ” indicates the first hierarchical levelwhereas “ ” and “ ” indicatethat the second hierarchical level is now displayed.Menu items accompanied by a “ ” mark indicate data which is storedon a scene by scene basis; menu items accompanied by a “ ” markindicate data which is stored together for one camera regardless of thescenes.For details on factory default settings, see “Camera menu item table”(→ page 66).Top Menu screenTop MenuCameraSystemOutputPan/TiltPresetMaintenanceCameraSelect this to open the camera menu relating to the camera images.SystemSelect this to display the System menu used to set up system formatof the camera or adjust the genlock (external synchronization) phaseor establish the camera output image settings.OutputSelect this to display the Output menu used for setting video/audiooutput for the camera, OSD output, etc.Pan/TiltSelect this to display the Pan/Tilt menu used for various pan/tiltoperations.PresetSelect this to display the Preset menu used for various preset playbackoperations.MaintenanceSelect this to display the Maintenance menu used to check thecamera’s firmware version or initialize its settings.• The Top Menu does not have a [Return].To close the menu screen, use the controller to perform the operationto close the menu screen. For further details, refer to “Basic setupoperations” (→ page 41).42
