Panasonic AW-UE150WP Operating Instructions Manual

Also see for AW-UE150KE: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Chroma LevelSet here the color intensity (chroma level) of the images.Setting range: OFF, –99% to 99%Factory settings: 0%White Balance ModeSet the white balance mode.Select the mode when the coloring is not natural because of thenature of the light source or other factors.If the white color serving as the reference can be recognized, subjectscan be shot with natural coloring.Setting value:ATW In this mode, the white balance is compensated forautomatically, even if changes occur in the light source orcolor temperature, by a process of continuous and automaticadjustment.AWB AAWB BWhen [AWB A] or [AWB B] is selected and the white balanceis executed, the adjustment results obtained are stored in thememory selected.When [AWB A] or [AWB B] is then selected, the white balancestored in the selected memory can be recalled.3200K This is the white balance mode which is ideal when a 3200Khalogen light is used as the light source.5600K This is the white balance mode which is ideal when 5600Ksunlight or fluorescent lighting is used as the light source.VAR Specify a color temperature between 2000K and 15000K.Factory settings: AWB AAWBThis is used to execute automatic white balance (AWB) to set thewhite balance. For further details, refer to page 36.Color TemperatureSpecify a color temperature between 2000K and 15000K.This is enabled when [White Balance Mode] is set to [VAR].Setting range: 2000K to 15000KFactory settings: 3200KR GainThis enables the R gain to be adjusted.This is enabled when [White Balance Mode] is set to [AWB A],[AWB B], or [VAR].Setting range: –150 to +150Factory settings: 0B GainThis enables the B gain to be adjusted.This is enabled when [White Balance Mode] is set to [AWB A],[AWB B], or [VAR].Setting range: –150 to +150Factory settings: 0ABBThis is used to execute automatic black balance (ABB) to set theblack balance. For further details, refer to page 38.PedestalThis item is used to adjust the black level (adjust the pedestal).These parts become darker when a negative setting is selected and,conversely, lighter when a positive setting is selected.Setting range: –150 to +150Factory settings: 0R PedestalThis enables the R pedestal to be adjusted.The same R pedestal setting is used for all the scenes.Setting range: –100 to +100Factory settings: 0B PedestalThis enables the B pedestal to be adjusted.The same B pedestal setting is used for all the scenes.Setting range: –100 to +100Factory settings: 0DetailTurn on/off the contour (sharpness of images) adjustment of images.Setting value: Off/OnFactory settings: OnMaster DetailAdjust the contour (sharpness of images) of images.Higher values result in increased sharpness in contours.Setting range: 0 to 62Factory settings: 0V Detail LevelAdjust the contour correction level in the vertical direction.Setting range: –7 to +7Factory settings: 0Detail BandSet the boost frequency of detail.Setting range: –7(Low frequency) to +7 (High frequency)Factory settings: 0Higher frequencies result in a more detailed effect applied to thesubject.Noise SuppressThis is selected to reduce the screen noise which is generated by thedetail effect.The higher the settings, the more the noise is reduced.Setting range: 0 to 60Factory settings: 1Flesh Tone Noise SUP.This function is selected to make the skin of the subjects to be shotappear to be smoother and more attractive.The higher the settings, the more the effect is enhanced.Setting range: 0 to 31Factory settings: 16Gamma TypeSelect the type of gamma curve.Setting value:HD HD (High Definition) video gamma characteristic.SD Gain in dark areas is higher than in HD gamma.FILMLIKE1 Characteristic capable of reproducing better gradation inhighlights than HD gamma.FILMLIKE2 Characteristic capable of reproducing better gradation inhighlights than [FILMLIKE1].FILMLIKE3 Characteristic capable of reproducing better gradation inhighlights than [FILMLIKE2].Factory settings: HD99Web screen configurations (continued)