Panasonic AW-UE150WP Operating Instructions Manual

Also see for AW-UE150KE: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Picture 7/8 screenPicture 7/8Knee Mode AutoAuto Knee Response 4Knee Point 93.0%Knee Slope 85HLG Knee OffHLG Knee Point 80%HLG Knee Slope 0ReturnKnee Mode [Off, Auto, Manual]Set the operating mode for gradation compression (knee).Off Turn the knee function off.Auto Enable the knee function, and set the knee point and kneeslope automatically.Manual Enable the knee function, and set the knee point and kneeslope manually.This is only enabled when [Gamma Mode] is set to other than [HLG].Auto Knee Response [1 to 8]Set the speed of the auto knee response.The response speed increases the lower the setting value.This is only enabled when [Gamma Mode] is set to other than [HLG].Knee Point [70.0% to 107.0%]Set the compression level (knee point) position for high-brightnessvideo signals.This is only enabled when [Gamma Mode] is set to other than [HLG].This is only enabled when [Knee Mode] is set to [Manual].Knee Slope [0 to 99]Set the knee slope.This is only enabled when [Gamma Mode] is set to other than [HLG].This is only enabled when [Knee Mode] is set to [Manual].• When [DRS] is enabled, the knee setting is disabled.HLG Knee [Off, On]Enable or disable the operation of the HLG knee.This is only enabled when [Gamma Mode] is set to [HLG].HLG Knee Point [55% to 109%]Set the position of the HLG knee point.This is only enabled when [Gamma Mode] is set to [HLG].HLG Knee Slope [0 to 100]Set the slope of the HLG knee.This is only enabled when [Gamma Mode] is set to [HLG].ReturnReturn to the previous menu level.Picture 8/8 screenPicture 8/8White Clip OnWhite Clip Level 109%DNR OffReturnWhite Clip [Off, On]Turn the white clip function off/on.This is only enabled when [Gamma Mode] is set to other than [HLG].White Clip Level [90% to 109%]Set the white clip level.This is only enabled when [Gamma Mode] is set to other than [HLG].This is only enabled when [White Clip] is set to [On].• When [Knee Mode] is set to [Auto] and the value of [White ClipLevel] is changed, the knee value will also change.DNR [Off, Low, High]Set the digital noise reduction level for outputting bright, clear imageswithout noise, even at night and low-light conditions.When [Low] or [High] is selected, noise can be eliminated.However, image lag may increase.ReturnReturn to the previous menu level.50Camera menu items (continued)