Audio screen [Audio]Configure audio settings.• Images and audio are not synchronized. Therefore, images and audiomay be slightly out of sync.• The audio may skip depending on the network environment.AudioSet the communication mode used to transmit audio data betweenthe unit and the personal computer.Setting value:Off Do not transmit audio data between the unit and the personalcomputer. All settings and controls related to audio will bedisabled.On The personal computer receives audio data from the unit. Thisallows images to be viewed on the personal computer withaudio. Images and audio are not synchronized.Factory settings: OffAudio encoding formatSelect the audio compression format.Setting value: ????/AAC-LC (High quality)Factory settings: AAC-LC (High quality)Audio bit rateSet the bit rate for transmitting audio.Setting value:????????????AAC-LC (High quality)64kbps/96kbps/128kbpsFactory settings: 128kbpsMic input volumeSet the volume of the audio from the unit when listening to it on thepersonal computer.Setting value:Mic High Set the volume to high. Use this when audio is input tothe camera via a microphone.Mic Middle Set the volume to medium. Use this when audio is inputto the camera via a microphone.Mic Low Set the volume to low. Use this when audio is input tothe camera via a microphone.Line High Set the volume to high. Use this when audio is input tothe camera via line input.Line Middle Set the volume to medium. Use this when audio isinput to the camera via line input.Line Low Set the volume to low. Use this when audio is input tothe camera via line input.Factory settings: Line MiddlePlugin PowerTurn plug-in power on/off.Setting value:Off Set plug-in power to on.On Set plug-in power to off.• This is only enabled when [Mic input volume] is set to [Mic High],[Mic Middle], and [Mic Low]. Image adjust/Preset position screen[Image/Position]Display the image adjustment/preset position screen.Image adjustWhen you click the [Setup] button, the image adjust screen [Imageadjust] appears. (→ page 97)Preset positionWhen you click the [Setup] button, the preset position screen [Presetposition] appears. (→ page 104)96Web screen configurations (continued)
