Panasonic DMC-L1K Operating Instructions Manual

Also see for DMC-L1K - Lumix Digital Camera SLR: Operating instructions Operating instructions Operating instructions

Contents

Others118VQT0W82∫ TV, PC and printer1: The picture does not appear on thetelevision.• Is the camera connected to the TVcorrectly?• Set the TV input to external input mode.2: The display areas on the TV screenand the camera’s LCD monitor aredifferent.Depending on the TV model, the areadisplay may be smaller so the picturemay be stretched horizontally orvertically and the top and bottom or leftand right of the picture may be cut offwhen it is displayed. This is due to theTV specifications and is not amalfunction.3: The picture cannot be transferredwhen the camera is connected to aPC.• Is the camera connected to the PCcorrectly?• Is the camera recognized by the PCcorrectly?• Set [USB MODE] to [PC]. (P29, 98)4: The card is not recognized by the PC.• Disconnect the USB connection cable.Connect it again while the card isinserted in the camera.5: The picture cannot be printed whenthe camera is connected to a printer.• Does the printer support PictBridge?– You cannot print pictures with printerswhich do not support PictBridge.(P100)• Set [USB MODE] to [PictBridge (PTP)].(P29, 100)6: The ends of the pictures are cut atprinting.• When using a printer with a trimming orborderless printing function, cancel thisfunction before printing. (For details,refer to the operating instructions for theprinter.)• Depending on the photo printing store,you may be able to print pictures in 16:9size if they were recorded when theaspect ratio setting (P79) was [16:9].Check with the photo printing storebefore printing.7: The picture is not displayed fully onthe TV.• Check the [TV ASPECT] setting on thecamera. (P30)∫ Others1: An unreadable language was selectedby mistake.• Press [MENU/SET], select the [SETUP]menu icon [ ] and then select the [ ]icon to set the desired language. (P30)2: A sound is heard when the camera isturned on or off.This is the sound of lens or aperturemovement and is not a malfunction.3: A certain part of the picture appearsblinking in black and white.• Is [HIGHLIGHT] set to [ON]?– This appears due to the highlightfeature function which shows whitesaturated areas. (P29)4: The AF assist lamp does not turn on.• Is [AF ASSIST LAMP] in the [REC]mode menu set to [ON]? (P82)• Are you taking pictures in dark places?– The AF assist lamp does not turn onin bright places.Downloaded from ManualsCamera.com Manuals