Panasonic DMC-L1K Operating Instructions Manual

Also see for DMC-L1K - Lumix Digital Camera SLR: Operating instructions Operating instructions Operating instructions

Contents

Basic33VQT0W82• The camera focuses on any of 3 focusarea points- left, right or center - in theAF frame and a lamp (AF-LED display)lights where the subject is focused. Youcan change the setting for the AF frameand the AF-LED display in the[CUSTOM] menu. (P84)• Refer to P33 for information aboutProgram shift.• The focus range is 29 cm (0.95 feet)to ¶. (when the supplied lens isattached)• If the ISO sensitivity is set to [ISO100]and the aperture value is set to F2.8(when the supplied lens is attached),the shutter speed is automatically setbetween about 4 seconds and 1/4000thof a second.5 Press the shutter button fully totake the picture.• A picture is not taken until the subject isbrought into focus.• If you want to press the shutter buttonfully to take a picture even when thesubject is not focused, set[FOCUS PRIORITY] in the [CUSTOM]menu to [OFF]. (P86)• We recommend checking that the clock isset properly before taking pictures. (P26)• When a time is set for power save (P28),the camera automatically turns off if youdo not operate it within the set time. Tooperate the camera again, press theshutter button halfway or turn the cameraoff and on.• To avoid picture noise, we recommendreducing the ISO sensitivity before takingpictures. (P71) (ISO sensitivity is set to[AUTO] when the camera is shipped.Therefore, when taking pictures indoorsetc. the ISO sensitivity increases.)• When you use a lens with no aperturering, press [FUNC.1] and then rotate thecommand dial to set the aperture.∫ Program shiftIn program AE mode, you can change thepreset aperture value and shutter speedwithout changing the exposure. This iscalled program shift.You can make the background more blurredby decreasing the aperture value or recorda moving subject more dynamically byslowing the shutter speed when taking apicture in program AE mode.• Press the shutter button halfway and thenpress 3/4 or rotate the command dial Ato activate program shift while the aperturevalue and the shutter speed are displayedon the Viewfinder (about 10 seconds).• The program shift indication B appearson the screen if program shift is activated.• To cancel program shift, turn the cameraoff or rotate the command dial up anddown until the program shift indicationdisappears.PSTANDARDSTANDARDISOISO 100100AUTOAUTOWBWB1919SINGLESINGLE NORMALNORMALCUSTOMCUSTOM-1 +1+10- 2 +2+2250250F 4.04.0BADownloaded from ManualsCamera.com Manuals