Panasonic DMR-ES40VS Operating Instructions Manual

Also see for Diga DMR-ES40V: Quick setup guide

Contents

Panasonic DMR-ES40VS Operating Instructions Manual Manual pdf 15 page image

Getting started15VQT0R73After plugging the unit into your household AC outlet and pressing[Í, DVD/VHS POWER] to turn the unit on for the first time, the unitassists you in setting the on-screen language, and automaticallytunes in all the channels it can receive and sets the clock.The unit automatically determines the type of transmission (airwavesor cable) and puts them into channels as follows.Preparation≥Press [DVD].≥Turn on the TV and select the appropriate video input to suit theconnections to the unit. (Example: AV input, CH3 or CH4)≥If you connect the unit through a cable TV box or satellite receiver(l 13), tune to your local PBS for Auto Clock Setting to work.If there is no local PBS, set the clock manually (l 44, “Set ClockManually”).[1] Press [Í, DVD/VHS POWER].[2] Press [CH, W, X] to select an RF output channelnumber.The unit’s displayEach time you press the button:CH3 (Default setting) (# CH4 (# OFF^-----------------------------------------------J[3] Use [3, 4] to select the language and press[ENTER].[4] Press [ENTER] to start Plug-in Auto Tuning.≥The unit then proceeds with Auto Clock Setting. The time isdisplayed when Auto Clock Setting is finished.≥DST, Daylight Saving Time, shows the summertime setting.≥Time Zone shows the time difference from Greenwich MeanTime (GMT).EST (Eastern Standard Time) l GMT j5CST (Central Standard Time) l GMT j6MST (Mountain Standard Time) l GMT j7PST (Pacific Standard Time) l GMT j8AST (Alaska Standard Time) l GMT j9HST (Hawaii Standard Time) l GMT j10For other areas: xx hr[5] Press [ENTER].∫If the clock is an hour slower or faster than the actualtimeSelect “j1” or “i1” in “Adjust Time Zone” in the SETUP menu(l 44).∫If the unit couldn’t set the clock automaticallySet the time manually (l 44, “Set Clock Manually”).∫To start Plug-in Auto Tuning againWhen the unit is on and stopped[1] Press and hold [CH, W] and [CH, X] on the main unit for about 5seconds.The unit turns off.[2] Press [Í, DVD/VHS POWER] to turn the unit on.Plug-in Auto Tuning starts.STEP 2 Plug-in Auto TuningBand ChannelAntenna Mode(Airwaves)VHF 2 to 13UHF 14 to 69CableTV Mode(Cable)VHF 2 to 13CATV LOW BAND 95 to 99CATV MID/SUPER BAND 14 to 36CATV HYPER BAND 37 to 65ULTRA BAND 66 to 94100 to 125SPECIAL CATV CHANNEL 1PLAYSSCHEDULE TIME SLIPFUNCTIONSDIRECT NAVIGATORTOP MENURETURNSTATUSDISPLAYSUB MENUJET REWOPERATIONSELECTPOWERC SCANCEL/RESETVOLUMECHINPUT SELECTAUDIOTVTV/VIDEOVHS DVDTRACKING/V-LOCKDVD/VHS POWERVCR Plus+DVD/VHS POWER3, 4ENTERCH, W, XÍDVD DVDEnglishEspañolFrançaisPress ENTERPulse ENTERAppuyer sur ENTERSelect LanguageSeleccione el idiomaSélection de LangueConnection (without Audio/Videocable):Select “CH3” or “CH4” which displaysthe screen on the right.Connection (with Audio/Videocable):Select “OFF”Signal source, RF output channel, channel caption, andguide channel settings for VCR Plusi system all revert tothe default values when you perform the procedure below.Scheduled recording settings are also cleared.The unit’s displaySet Channels AutomaticallyCh.Set Channels AutomaticallyProceeding . . .1 1 11Set Clock AutomaticallyAuto Clock Setting is complete.11/1/2005 12:15 AMDST............. OnTime Zone.... CSTGetting started