Panasonic DMR-ES40VS Operating Instructions Manual

Also see for Diga DMR-ES40V: Quick setup guide

Contents

Panasonic DMR-ES40VS Operating Instructions Manual Manual pdf 28 page image

Recording28VQT0R73[RAM] [-R] [-RW‹V›] [+R]∫ Scheduled recording automatically starts at the settime.≥Scheduled recording can be started only when the unit is turned off.About 1 minute before the scheduled recording starts, the unitswitches on. When it finishes, the unit switches back off. If anotherprogram is also being played back, the unit does not switch backoff.∫ Scheduled recording cannot be activated on both DVDand VHS at the same time.Make sure the scheduled recording start times do not overlap onboth DVD (l 29) and VHS (l 51) Scheduled Recording Listscreens.When the scheduled recording settings overlap:≥When the start time of both scheduled recordings is the same, thescheduled recording of the last one set has priority.You can enter up to 16 programs a month in advance.Preparation≥Release protection (disc l 30, cartridge l 30) [RAM].≥Insert a disc (l 8) and confirm there is sufficient empty space forrecording on it (l 45).≥Check that the clock is set to the correct time.Entering the PlusCode® numbers is an easy way of scheduledrecording. You can find these codes in TV listings in newspapers andmagazines.≥When connecting a cable TV box or satellite receiver, the VCRPlusi system does not work. Program the scheduled recordingmanually (l 29).[1] Press [VCR Plus_].[2] Press the numbered buttons to enter thePlusCode number.≥Press [2] to move back to correct a digit.[3] Press [ENTER].≥Confirm the program and correct it if necessary using [3, 4,2, 1] (“Manual programming” l 29, step 2).≥When “XP” is displayed in the unit’s display, the recordingmode automatically changes to “FR” in order to prevent loss ofrecording when there is not enough space. Change to “XP”mode if you want to set scheduled recording using “XP” mode.≥“Invalid Entry” is displayed when you enter the wrong PlusCodenumber. Reenter the PlusCode number.≥To enter the name of the programPress [2, 1] to select “Title Name” and press [ENTER](l 32).[4] If the program is correctPress [ENTER].≥Make sure that the scheduled recording has been programmedcorrectly on the SCHEDULED LIST screen (l 29).≥Repeat steps 1–4 to program other recordings.[5] Press [SCHEDULE].≥The message “Turn recorder off for Scheduled Recording.” isshown on the TV.[6] Press [Í, DVD/VHS POWER].≥Scheduled recording can be started only when the unit isturned off.≥The unit turns off and “ ” lights on the unit’s display to indicatescheduled recording standby has been activated.∫To release the unit from scheduled recording standbyPress [Í, DVD/VHS POWER].The unit turns on and “ ” goes out.≥Be sure to press [Í, DVD/VHS POWER] to return the unit tostandby mode before the scheduled recording time. Scheduledrecording will work only if “ ” is displayed.∫To stop recording while a program is working[1] Press [DVD][2] Press [∫, STOP], then [ENTER] within 5 seconds.≥You can also press and hold [∫] on the main unit for 3 or moreseconds to stop recording.NoteRefer to Note in Manual programming (l 29).Preparation≥Press [DVD].Cautions for using scheduled recordingon DVDScheduled RecordingSKIP/INDEX SLOW/SEARCHREW FFPLAYSSCHEDULEOPERATIONSELECTDVD ERASEREC REC MODE ADD/DLTPOWERTIME SLIPFUNCTIONSDIRECT NAVIGATORTOP MENURETURNCM SKIPCANCEL/RESETVOLUMECHINPUT SELECTSTATUSDISPLAYAUDIOTVTV/VIDEOVHS DVDTRACKING/V-LOCKSUB MENUDVD/VHS POWERVCR Plus+COPYINGVHS DVDCREATECHAPTER VCR/TVJET REWSCHEDULEREC MODEDVDVCR Plus+CANCELDVDVCR PlusiSCHEDULEREC MODE∫3, 4, 2, 1ENTERÍDVD/VHS POWERNumberedbuttons∫ Using VCR Plus_ systemVCR Plus+ Remaining Recording Time VHS 1:43 SP DVD 1:43 SP11/15 Tue 8:34 PMPress ENTER to store new scheduleSCHEDULEDRECORDINGRemaining Recording Time VHS 1:43 SP DVD 1:43 SP11/15 Tue 8:34 PM39 11/29 Tue 10:00 PM 11:00 PM DVDTitle NameSPChannel Date On Off Drive ModeDVD