Panasonic DMR-ES40VS Operating Instructions Manual

Also see for Diga DMR-ES40V: Quick setup guide

Contents

Panasonic DMR-ES40VS Operating Instructions Manual Manual pdf 57 page image

Transferring (Dubbing)57VQT0R73When connecting to the IN2/DV input terminals on the front ofthe unit≥You can also connect to the IN1 input terminals on the rear of theunit.Before connecting any cables, first make sure that the power forthe unit and the external device are off. Then, after connectingcables, turn on both.If the audio output of the other equipment is monauralConnect to L/MONO. (Both left and right channels are recordedwhen connected through L/MONO.)≥The S-VIDEO terminal achieves a more vivid picture than theVIDEO terminal.When recording from the unit’s DV input terminal (l 27)≥The audio recorded through the DV input terminal is the audioselected in the “Select Audio Channel For DV Input” (l 42).≥When recording from DV equipment (e.g., digital video camcorder),you can record audio/video recordings from DV tape only.≥The DV input on this unit is for use with DV equipment only.Preparation≥Connect an external device to this unit’s input terminals(l above).DVD [RAM] [-R] [-RW‹V›] [+R]≥Release protection (disc l 30, cartridge l 30). [RAM]≥Press [DVD].VHS≥Insert a video cassette with an accidental erasure prevention tab.(l 46)≥Press [VHS].[1] Press [REC MODE] to select the recordingmode. (DVD l 24, VHS l 49)≥DVD [RAM] [-R] [-RW‹V›] [+R]- It is also possible to perform Flexible Recording (FR). (l 25)[2] While stoppedPress [CH, W, X] or [INPUT SELECT] to selectthe input channel for the equipment you haveconnected.≥Select IN1, IN2 or DV.≥For VHS, the “DV” channel can be selected however it cannotbe recorded.Follow the above steps 1 to 2.[3] Start play on the external device.[4] Press [¥, REC] at the point where you want tostart recording.Follow the above steps 1 to 2.[3] Press [1, PLAY].≥Start playing the video cassette and find the recording startpoint.[4] Press [;, PAUSE], then press [¥, REC].≥Put the unit in recording standby mode.[5] Start play on the external device.[6] Press [;, PAUSE] at the point where you wantto start recording.∫ To skip unwanted partsPress [;, PAUSE] to pause recording. (Press again to restart recording.)∫ To stop recordingPress [∫, STOP].Note≥When recording using the unit’s input terminals, only the sound received at the time of recording will be recorded. As long as secondaryaudio that is recorded on the media in the external device is not output to the unit in play, it is not recorded.≥When recording using IN1 or IN2 terminals, only the sound received at the time of recording will be recorded.For your reference≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.Recording from an external deviceEJECTPOWERS VIDEO INVIDEO INSKIPREW/FF– AUDIO IN – RL/MONOIN2DVDVHS––:/6 5/9VHS DVDVHS DVDCH RECOPERATIONSELECTDUBBING/k1.3DV INDV IN(2)(1) (3)(4)(1) Audio/Video cable (not supplied)A Yellow (VIDEO)B White (L)C Red (R)(2) S-Video cable (not supplied)(3) DV cable (IEEE1394, 4-pin)(4) External device (Playback equipment)∫ Manual recording1 DVD 1 VHSVHSDVDTransferring(Dubbing)