Panasonic DMR-ES40VS Operating Instructions Manual

Also see for Diga DMR-ES40V: Quick setup guide

Contents

Panasonic DMR-ES40VS Operating Instructions Manual Manual pdf 29 page image

Recording29VQT0R73≥When connecting a cable TV box or satellite receiver, select thechannel on the cable TV box or satellite receiver before scheduledrecording starts.[1] Press [SCHEDULE].≥Make sure “New Scheduled Recording” is selected.[2] Press [ENTER], then move and change theitems using [3, 4, 2, 1].≥You may use the numbered buttons to enter “Channel”, “Date”,“On”, and “Off”.≥Channel (Program Position/TV Station Name)≥DateYou can also make a daily or weekly program.Each daily or weekly program is counted as one program.≥On (start time)/Off (finish time)The time increases or decreases in 30-minute increments ifyou hold down the button.≥Drive (Recording drive)Select recording drive to “DVD”.≥Mode (Recording mode)You can also press [REC MODE] to change the recordingmode.XP,.SP,.LP,.EP,.FR,.XP... (l 24)≥Title NamePress [2, 1] to select “Title Name” and press [ENTER](l 32).[3] Press [ENTER] when you have finished makingchanges.≥“Invalid Entry” is displayed when you enter the wrong item.Reenter the item.≥Make sure that the scheduled recording has been programmedcorrectly on the SCHEDULE LIST screen (l right).≥To continue programming:Select “New Scheduled Recording” and repeat steps 2–3.[4] Press [SCHEDULE].≥The message “Turn recorder off for Scheduled Recording.” isshown on the TV.[5] Press [Í, DVD/VHS POWER].≥Scheduled recording can be started only when the unit isturned off.≥The unit turns off and “ ” lights on the unit’s display to indicatescheduled recording standby has been activated.∫ To release the unit from scheduled recording standbyPress [Í, DVD/VHS POWER].The unit turns on and “ ” goes out.≥Be sure to press [Í, DVD/VHS POWER] to return the unit tostandby mode before the scheduled recording time. Scheduledrecording will work only if “ ” is displayed.∫ To stop recording while a program is working[1] Press [DVD][2] Press [∫, STOP], then [ENTER] within 5 seconds.≥You can also press and hold [∫] on the main unit for 3 or moreseconds to stop recording.Note≥When the unit is carrying out a scheduled recording, you can utilizeplayback. [RAM]≥“ ” flashes when the unit cannot perform scheduled recording(non-recordable disc or protected disc, etc.). Check the disccarefully.≥The actual time recorded may be longer than the program itselfwhen TV programs are recorded using VCR Plus_ system.≥When recording more than one program in a row, for DVD-RAM thefirst few seconds, and for DVD-R, DVD-RW (DVD-Video format) or+R about the first 30 seconds of all programs from the second oneonwards will not be recorded.≥If you set “DST” (Daylight Saving Time) to “On” when manuallysetting the clock (l 44), scheduled recording may not work whensummer switches to winter and vice versa.Even when the unit is turned off, you can display the scheduledrecording list by pressing [SCHEDULE].[1] Press [SCHEDULE].Icon explanations (A)¥ Currently recordingW Programs are overlapped. Recording of the program with thelater start time starts when the earlier program finishesrecording.n You stopped a weekly or daily scheduled recording. The icondisappears when the next scheduled recording starts.F The disc was full. (not enough space)The TV program may not be recorded due to copy-protection.X Recording stopped (Dirty disc, etc.)Check (B)OK: Recordable# (Date): The last day of daily or weekly recording.!: It may not be possible to record because:≥the disc is write-protected≥there is no more space left≥the number of possible titles has reached its maximum.Overlap: When the date and time overlap with another scheduledrecording, only a part of the program can be recorded.– –: Scheduled recording for VHS.[2] Press [3, 4] to select the program.≥You may also select program by inputting a 2-digit numberusing the numbered buttons.e.g.: “5”: [0] )[5]“15”: [1] )[5]≥Press [2, 1] to move to the preceding or following page.[3] Press [CANCEL/RESET, ¢] to delete,You cannot delete programs that are currently recording.or press [ENTER] to change.The scheduled recording setting screen appears.[4] If you pressed [ENTER] in step 3,Use [3, 4, 2, 1] to change and press [ENTER].[5] Press [SCHEDULE].≥The message “Turn recorder off for Scheduled Recording.” isshown on the TV.∫To put the unit on scheduled recording standbyPress [Í, DVD/VHS POWER].≥The unit turns off and “ ” lights on the unit’s display to indicatescheduled recording standby has been activated.For your reference≥Programs that failed to record are not deleted from the listimmediately (indicated in gray), but are deleted from the listautomatically at 4 a.m. 2 days later.≥During scheduled recording, you can change the end time as longas the recording mode is not “FR”.∫ Manual programmingSCHEDULELISTRemaining Recording Time VHS 1:43 SP DVD 1:43 SP11/15 Tue 8:34 PM01 39 11/29 Tue 10:00 PM 11:00 PM DVD SP OKNo Channel Date On Off Drive Mode CheckNew Scheduled RecordingNew ScheduledRecording is selected.Press ENTER to store new scheduleSCHEDULEDRECORDINGRemaining Recording Time VHS 1:43 SP DVD 1:43 SP11/15 Tue 8:34 PMTitle NameChannel Date On Off Drive Mode: :Check, change or delete programsSCHEDULELISTRemaining Recording Time VHS 1:43 SP DVD 1:43 SP11/15 Tue 8:34 PM01 39 7/19 Tue 10:00 PM 11:00 PM Drive SP OKNo Channel Date On Off Drive Mode CheckNew Scheduled RecordingA BRecordingDVD