Panasonic DMR-ES40VS Operating Instructions Manual

Also see for Diga DMR-ES40V: Quick setup guide

Contents

Panasonic DMR-ES40VS Operating Instructions Manual Manual pdf 16 page image

Getting started16VQT0R73[1] While stoppedPress [FUNCTIONS].[2] Select “Other Functions” with [3, 4] and press[ENTER].[3] Select “SETUP” with [3, 4] and press [ENTER].[4] Select “Channel” with [3, 4] and press [2, 1].[5] Select “Signal Source (RF IN)” with [3, 4] andpress [ENTER].[6] Select “Antenna” or “CableTV” with [3, 4] andpress [ENTER].[7] Select “Set Channels Automatically” with[3, 4] and press [ENTER].[8] Press [ENTER].≥Auto Channel Setting starts. This takes a few minutes.[9] Press [ENTER].∫ To cancel in the middlePress [RETURN].∫ To exit the screenPress [RETURN] several times.Add or delete channels if necessary channels are not set orunnecessary channels are set.[1] Press the numbered buttons to select achannel.Antenna Mode (Airwaves)e.g., “5”: [0] )[5]“15”: [1] )[5]CableTV Mode (Cable)e.g., “5”: [0] )[0] )[5]“15”: [0] )[1] )[5]“115”: [1] )[1] )[5]≥You can also use [CH, W, X] to select a channel.[2] Press [ADD/DLT].e.g., The channel is deleted.Set these guide channels so you can use VCR Plusi® system forscheduled recording. Before starting the settings, prepare a chartshowing the station names, guide channels and channel numbers.e.g., :° Look up the guide channels for the stations in magazines.°° Write down all the stations you can receive.≥If you have connected a cable TV box or satellite receiver, theVCR Plus_ system does not work so you do not have to set theguide channels.[1] While stoppedPress [FUNCTIONS].[2] Select “Other Functions” with [3, 4] and press[ENTER].[3] Select “SETUP” with[3, 4] and press[ENTER].[4] Select “Channel” with[3, 4] and press[2, 1].[5] Select “VCR Plusr Ch.Setting” with [3, 4]and press [ENTER].e.g., “Signal Source (RF IN)” isset to “CableTV”.[6] Use [3, 4] to select theguide channel you wantto set and press [1].∫ If Plug-in Auto Tuning failsPLAYSSCHEDULEDVD ERASEREC REC MODE ADD/DLTTIME SLIPFUNCTIONSDIRECT NAVIGATORTOP MENURETURNSTATUSDISPLAYSUB MENUCOPYING CREATECHAPTER F.RECJET REWADD/DLTFUNCTIONSRETURNSKIP/INDEX SLOW/SEARCHREW FFPLAYOPERATIONSELECTPOWERCM SKIPCANCEL/RESETVOLUMECHINPUT SELECTAUDIOTVTV/VIDEOVHS DVDTRACKING/V-LOCKDVD/VHS POWERVCR Plus+CANCEL3, 4, 2, 1ENTERFUNCTIONSRETURNADD/DLTCH, W, XNumberedbuttonsFUNCTIONS DVDDVD-RAM Cartridge Protection OffDisc Protection OffDIRECT NAVIGATORSCHEDULEVCR Plus+123Other Functions ReturnPLAYLISTSFLEXIBLE RECORDINGDV AUTO RECORDINGSETUPDISC MANAGEMENTENTERPlaybackScheduleOff TimerRemote Control CodeClock Settings6 HoursSet Code 1Quick StartRestore Default SettingsOnChannelSetupDiscVideoAudioDisplaySETUPManual Channel CaptionsVCR Plusi Ch. SettingSignal Source (RF IN)Set Channels AutomaticallyChannel CaptionsPreset Channel CaptionsCableTVOff TimerRemote Control CodeClock Settings6 HoursSet Code 1Quick StartRestore Default SettingsOnChannelSetupDiscVidSETUPAntennaCableTVSignal Source (RF IN)∫ Adding and deleting channelsSTEP 3 Channel settings∫ Guide channel settings for VCR PlusisystemStationnameGuidechannel°Channelnumber°° Channel settingCBS 04 04 UnnecessaryHBO 33 15 Enter channel 15 nextto Guide Channel 33.Nickelodeon 38 20 Enter channel 20 nextto Guide Channel 38.The unit’s displayChannel 15 DeletedOff TimerRemote Control CodeClock Settings6 HoursSet Code 1Quick StartRestore Default SettingsOnChannelSetupDiscVideoAudioDisplaySETUPManual Channel CaptionsVCR Plusi Ch. SettingSignal Source (RF IN)Set Channels AutomaticallyChannel CaptionsPreset Channel CaptionsCableTVChannelSetupDiscVideoAudioDisplayTV ScreenVHSSETUP VCR Plusi Ch. SettingsGuide Channel Cable Channel------1251------23ENTERChannelSetupDiscVideoAudioDisplayTV ScreenVHSSETUP VCR Plusi Ch. SettingsGuide Channel Cable Channel---456------78------ENTER