Panasonic DMR-ES40VS Operating Instructions Manual

Also see for Diga DMR-ES40V: Quick setup guide

Contents

Panasonic DMR-ES40VS Operating Instructions Manual Manual pdf 27 page image

Recording27VQT0R73[RAM]When the “DV AUTO RECORDING” function is used, programs arerecorded as a title. At the same time chapters are created at eachbreak in the images automatically.Preparation(1) Turn off the main unit and DV equipment, then connect theequipment with the unit’s DV input terminal (l 57).(2) Turn on the main unit and DV equipment.(3) Pause play of the DV equipment at the point you want recordingto start.(4) Press [DVD].[1] While stoppedPress [FUNCTIONS].[2] Select “Other Functions” with [3, 4] and press[ENTER].[3] Select “DV AUTO RECORDING” with [3, 4] andpress [ENTER].[4] Press [REC MODE] to select the recordingmode. (l 24)[5] Select “Rec.” with [2, 1] and press [ENTER].≥Recording starts.∫ When recording finishesThe confirmation screen appears. Press [ENTER] to finish DVautomatic recording.∫ To stop recordingPress [∫, STOP].∫ DV automatic recording(DV AUTO RECORDING)∫ Notes on DV automatic recording≥Only one piece of DV equipment (e.g., digital video camcorder)can be connected to the unit via the DV input terminal.≥Video camcorders from other manufacturers are not guaranteedto work.≥It is not possible to operate the unit from the connected DVequipment.≥The DV input on this unit is for use with DV equipment only. (Itcannot be connected to a computer, etc.)≥The DV equipment name may not be shown correctly.≥Depending on the DV equipment, the images or audio may notbe input properly.≥The date and time information on the tape in the DV equipmentwill not be recorded.≥You cannot recording and play simultaneously.≥When you are recording from a digital video camcorder, theremay be a slight delay (approx. 1 second) between pressing[ENTER] and recording starting. To ensure you recordeverything you want, start recording slightly earlier.If the DV automatic recording function does not work properly,check the connections and DV equipment settings, and turn theunit off and back on.If that does not work, follow the instructions for “Recordingfrom an external device” (l 57).DVDRecording