14RQT9272TipsTo return to the previous screenPress [RETURN].To exit the screenPress [EXIT].NotesIf a TV station transmits a time setting signal, and when “Automatic”in the Clock setting menu is set to “On”, the automatic timecorrection function checks the time and if necessary it is adjusted. to select “Yes”, then OKThe cursor moves to “Name”. to enter the name., to select a letter, then tomove to next character.Repeat this to enter the name.OKto store the name. and and then repeat steps, to enter and store “HouseNo.” and “Postcode”.RETURNThe Owner ID settings screen disappears.– Auto setup for your unit is complete.TipsTo correct the character1. Press [, ] to select the character.2. Press [, ] to correct the character.To display the Owner ID information on TVPress and hold [] on the main unit for more than 5 seconds.The PIN number is not displayed.After 30 seconds this menu automatically disappears.With the unit stoppedFUNCTIONMENU, to select “Others”, thenOK, to select “Setup”, then OK, to select “Others”, then ., to select “Clock”, then OK, to select “Off”of “Automatic”, then OK, to select the item you wantto change.The items change as follows:HourMinuteSecondDayMonthYear, to change the setting.You can also use the numbered buttons forsetting.OKto confirm new date andtime and to initiate the clock.RETURNClock SettingThis unit usually obtains time and date information frombroadcasts and automatically corrects the time.However, if the clock is not set correctly, adjust the clock.ClockAutomaticTime DatePlease set clock manually.OK: store RETURN: leaveOK RETURNSELECTCHANGENumberOff15 : 45 : 39 1 / 8 / 2009Setting the Channels and Clock
