33RQT9272TipsTo stop recordingPress [].Advanced FeaturesAdvanced Features[HDD]To make a timer recording with your television, connectto a television with a Q Link function (¼ 42) that you canuse for setting timer recordings using a fully wired 21-pinScart cable (¼ 10,11).Make timer programming on theTV.to turn the unit off.– The start and end of recording is controlledby TV.– The titles are recorded to the HDD.Notes When this unit is in EXT LINK standby (“EXT-L” on the unit’sdisplay lights), recording from TV does not start. Programmes are recorded as one title on this unit when the endtime of the earlier timer recording and the start time of the latertimer recording are close to each other.To divide the titles, go to “Divide Title” (¼ 45).Notes on timer recording When a timer recording is set, DVDs that were recorded usinga different TV system cannot be played unless the TV system ischanged in the Setup menu (¼ 71) or the timer recording hascompleted or has been cancelled. Timer recordings are activated regardless of whether the unit isturned on/off. Timer recordings begin when the set time is reached even whenplaying. Timer recordings do not begin while editing or copying in normalspeed mode (¼ 52). If the unit is turned on when timer recording begins, itremains turned on after recording finishes. It does not turn offautomatically. You can turn the unit off during timer recording. When you programme successive timer recordings to startimmediately one after the other, the unit cannot record the part atthe beginning of the later programmes.ProgrammeProgrammeRecordedRecordedNot recordedMaking timer recordings on the television(e.g., of digital broadcasts)Relief RecordingWhen the recording drive is “DVD” and there is notenough remaining blank space, recording automaticallyswitches to the “HDD”. If there is no disc in the tray orthe disc cannot be recorded on or when timer recordingstarts while copying, the recording drive will be altered tothe HDD. The DIRECT NAVIGATOR shows which programmeswere relief-recorded (“ ” is displayed.) (¼ 34). If the time remaining on the HDD is insufficient, asmuch of the programme as possible will be recordedonto the HDD.Auto Renewal Recording[HDD]If you record a programme onto HDD repeatedlyeveryday or every week using timer recording, the unitwill record the new programme over the old one.This function can be used only when weeklyrecording or daily recording is selected.Notes If a programme set for Auto Renewal Recording is protected orwhile play back is taking place from the HDD, or while copying,the programme will not be overwritten. Instead the programmeset for recording will be saved as a separate programme, and thisprogramme will be the one to be overwritten when the next AutoRenewal Recording takes place. Playlists made from programmes that were set for Auto RenewalRecording are deleted along with auto renewal. When there is not enough space on the HDD, the programmemay not be recorded completely.PROG/CHECK, to select the programme,then OK, to select “RENEW” column., to select “ON”, then OKTimerRecording 1:58 SPDVD30:24 SPHDDRemainFRI 10/10/08 12:54:00ModeStopStartChannel Date HDDDVD22:3022:00SUN HDD1 BBCProgramme NameSPRENEWON