15RQT9272 Quick Start Guide STEP 3VIDEO Plus+Input PlusCode Number 09, and press OK.VIDEO Plus+Record 1:58 SPDVD30:24 SPRemain HDD WED 23/04/08 12:53:00Enter a PlusCode number for adigital satellite station (e.g. SkyOne) with the numbered buttons.– Press [] to move back to correct a digit.OK TimerRecording 1:58 SPDVD30:24 SPHDDRemainWED 23/04/08 12:54:00Channel Stop20 : 00Start19 : 00Date23 / 4 WEDHDDDVDHDDProgramme NameModeSPPlease select channel.“-- ---” will appear under “Channel”., to select the AV2 input thatis to be used for recording fromthe digital satellite station.OK TimerRecording 1:58 SPDVD30:24 SPHDDRemainWED 23/04/08 12:54:00ModeStopStartNo. Date HDDDVDChannel Drivespace01 AV2 23/4 WED 19:00 20:00 HDD SP OKNew Timer Programme– The AV2 input corresponding to the PlusCodenumber is memorised.– Repeat steps above until you have setdummy timer recordings for each of the digitalsatellite stations that you will make VIDEOPlus+ recordings from. to select each programme thatyou have just set, then DELETEThe programme is deleted from the timerrecording list.Preparation: Turn on the digital satellite receiver(s). Select a correct station.This unit doesn’t have a built-in satellite tuner.If the satellite receiver is connected to this unit (¼ 11), thefollowing operation will allow you to use PlusCode numbers tomake timer recordings for digital satellite stations.TipsTo exit the screenPress [EXIT].VIDEO Plus+ system setting for digitalsatellite stations (Memorizing the PlusCodenumber)
