68RQT9272Playback/Recording SettingsFUNCTIONMENU (¼ 66, Accessing the Setup Menu)All factory default settings are indicated with “Underlined” text.Others SetupDisc, select “Disc” ¼ ¼ , select item ¼ OKSetupPictureSoundDisplayConnectionTuningSettings for PlaybackSettings for RecordingOthersDiscRETURNTAB SELECTSettings for PlaybackPress [OK] to show the following settings.RatingsSet a ratings level to limit DVD-Video play.Follow the on-screen instructions. Enter a 4-digit password withthe numbered buttons when the password screen is shown.Do not forget your password. Setting ratings (When level 8 is selected)[8 No Limit] All DVD-Video can be played.[1] to [7] Prohibits play of DVD-Video with correspondingratings recorded on them.[0 Lock All] Prohibits play of all DVD-Video. Changing settings (When level 0 to 7 is selected)[Unlock Recorder] [Change Password] [Change Level][Temporary Unlock]Soundtrack[English] [German] [French] [Italian] [Spanish] [Original][Other ]Subtitle[Automatic] [English] [German] [French] [Italian] [Spanish][Other ]Menus[English] [German] [French] [Italian] [Spanish] [Other ]Settings for RecordingPress [OK] to show the following settings.Recording time in EP modeSelect the maximum number of hours for recording in EP mode.[EP (6Hours)] You can record for 6 hours on an unused 4.7 GBdisc.[EP (8Hours)] You can record for 8 hours on an unused 4.7 GBdisc.Chapter CreationSet the automatic Chapter Creation method.(¼ 46)[Automatic][5 minutes][Off] No chapter start points are set.Recording FormatTitles recorded to the HDD with “Recording Format” set to “Videoformat” can be copied to DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RW using high speed mode.However, screen aspect, etc. is restricted (¼ below).We recommend turning the setting “VR format” if high speed copyto DVD-R, etc. is not necessary when recording a programme.This setting is effective when recording from a televisionprogramme or external equipment (including DV equipment), orwhen copying from a finalised DVD-Video disc.[VR format] High speed copy from HDD is possible only toDVD-RAM.[Video format] You can high-speed copy to DVD-R, etc. Press[, ] to select “Yes”, then press [OK]. The following restrictions are applied torecorded titles.– Select the type of audio in advance from“Bilingual Audio Selection” (¼ 69).– You are no longer able to switch the audiowhen watching a programme on an inputchannel on the TV connected to this unit (e.g.,AV1, etc).In some cases, copying to DVD-R, etc. usingthe high speed mode does not work (¼ 52,“Important”)DVD Speed for High Speed CopySelect the speed of high-speed copying (When using high-speedcopy compatible DVD-RAM 5X, DVD-R, +R 8X or +RW 4X discs).[Maximum][Normal (Silent)] Selecting “Normal (Silent)” means the noisegenerated by this unit is less than “Maximum”,however the time required for copying willdouble (approximately).Notes[DVD-V] Choose the language for audio, subtitles and discmenus. If a language which is not recorded is selected, or iflanguages are already fixed on the disc, the language set asthe default on the disc will be played instead.[Original] The original language of each disc will beselected.[Other ] This is the language code setting. Input a codenumber with the numbered buttons (¼ 91,“Language code list”).[Automatic] If the language selected for “Soundtrack” isnot available, subtitles of that language willautomatically appear if available on the disc.