57RQT9272Copying SD Video from a videoequipmentMotion pictures encoded in the MPEG2 format, which havebeen taken by a Panasonic digital video camera with HDD etc,can be copied from the camera’s HDD to this unit’s HDD orDVD-RAM.(All the recordings on the same date become a title.) You cannot playback SD Video in the camera’s HDD with thisunit.You must copy the files to the HDD or a DVD-RAM. You cannot playback or record while copying SD Video.HDDDVD-RAMUSB cableSD Video VideoDVD Video Recording formatPreparation: Turn on both this unit and the camera. Connect the camera to this unit with USB cable. Select the appropriate mode that makes the cameraready for data transfer (such as “PC CONNECT”) onthe camera. Refer to the camera’s operating instructions for detail.The display below automatically appears when youconnect the camera to this unit.Press [, ] to select “Copy Video ( MPEG2 )” and press[OK]. Then go to step 7 on page 55.USB deviceOK RETURNSELECTPlay Video ( DivX )Copy Video ( MPEG2 )Play Pictures ( JPEG )Copy Pictures ( JPEG )Play Music ( MP3&WMA )Copy Music ( MP3&WMA )Update CD database on HDDCopy All Pictures ( JPEG )SD Video on the camera are automatically registered onthe copy list.If there are no SD Video on the camera, “Copy Video( MPEG2 )” is not displayed.TipsTo return to the previous screenPress [RETURN].To stop copyingPress []You can also press and hold [RETURN] for 3 seconds tostop copying. If stopped partway, copying will be up to that point.Notes The screen on the right is recorded at the beginning. The content is recorded as 1 title fromthe start of copy to the end. If play does not begin automaticallyor if the top menu does not displayautomatically, press [ PLAY] to start. Even if you copy a high quality video/audio DVD, the original picture and audioquality cannot be exactly replicated. If you want to copy a title from a finalised DVD-RW (DVDVideo Recording format), create a copy list and then copy(¼ 55, Copying using the copying list–Advanced Copy).CopyMin.123Hour 002Cancel AllCopy DirectionCopy ModeCopy TimeDVD HDDDVD-Video XPSet the time a few minuteslonger. Press [, ] to select “Hour” and “Min.”, then press [,] to set the recording time. Press [OK]. Press [] to confirm.Copying to the HDD continues for the set time even afterthe content being played finishes.– Set a few minutes longer than the source title, in order toinclude the operation time before play begins.– You can also set the recording time with the numbered buttons . Press [, ] to select “Start Copying”, then press [OK].Press [] to select “Yes”, then press [OK] to startcopying. The disc top menu is displayed.– Disc play automatically begins from title 1 when “Title 1” isselected from the “Auto-Play Select” menu when finalisingthe disc (¼ 65). When the top menu is displayedPress [, , , ] to select the title you want tostart copying, then press [OK].My favourite 01/0201Chapter 10305020406Chapter 2Chapter 3 Chapter 4While playing in order, all the titles after the selected title arerecorded until the set time. (After the last title on the disc hasfinished playing the top menu is recorded until the set time isreached.)Advanced Editing