Panasonic Diga DMR-EH59EM Operating Instructions Manual

Contents

32RQT9272Advanced Timer RecordingTips You can enter up to 32 programmes a month in advance.You can also delete a programme with the following steps1. Press [, ] to select the programme, then press [OPTION].2. Press [, ] to select “Delete”, then press [OK].To exit the timer recording listPress [PROG/CHECK].Check, Change or Delete ProgrammesThe timer recording list can be viewed even when theunit is off. PROG/CHECK, then ,  to select theprogramme. Timer Recording screen icons: Timer programme is active.: Currently recording: Programmes are overlapped. Recording of the programmewith the later start time starts when the earlier programmefinishes recording.: You stopped a weekly or daily timer recording. Theicon disappears the next time the timer recording startsrecording.: The disc was full. (not enough space): The TV programme may not be recorded due to copy-protect.: Recording stopped (Dirty disc, etc.): Timer programmes set to Auto Renewal Recording (¼ 33).: Titles that have been rerouted to the HDD(Displayed while recording.)HDD Recording drive is set to HDDDVD Recording drive is set to DVD Drive spaceOK: Recordable¼ (Date):For recordings made daily or weekly, the display willshow until when recordings can be made (up to onemonth ahead from the present time) based on the timeremaining on the disc.!: It may not be possible to record because:– there is no more space left.– the number of possible titles has reached its maximum.Relief: Timer programmes that will be relief recorded to the HDD.2a DELETEto delete.– You cannot delete programmes that arecurrently recording.2b OKto modify the programme., , ,  to make changes,then OKNotes Recording stops and the timer programme is deleted. (Daily andweekly timer programmes remain and timer recording will startfrom the next time the timer recording is set.)To cancel a timer recording in progressWhile the unit is onSTOP– Confirmation screen appears. to select “Stop Recording”,then OKNotes Recording may fail if there are changes to the station’sprogramming. “” disappears from the unit’s display when no timer programmeis set or when all timer programmes are deactivated. Programmes that failed to record are deleted from the timerrecording list at 4 a.m. two days later.After performing step  of “Check, Change or DeleteProgrammes” (¼ left)AUDIO(Red)– “” (¼ left) disappears from the timerrecording list.– Press the “Red” button again to activate timerprogramme.Aft f i t  f “Ch k Ch D l tTo deactivate timer programme(e.g. to interrupt a daily or weekly timerprogramming)TipsYou can deactivate the timer programme in the followingprocedure as well.Perform step  (¼ above)1. Press [OPTION]2. Press [, ] to select “Timer Off”, then press [OK].TimerRecording 1:58 SPDVD30:24 SPHDDRemainFRI 10/10/08 12:54:00RETURNOKPress OK to store new programme.ModeStopStartNo. Date HDDDVDChannel DrivespaceNew Timer Programme