Panasonic Diga DMR-EH59EM Operating Instructions Manual

Contents

23RQT9272 Basic OperationsTimer RecordingPreparation: Turn on the television and select the appropriate video input to suit theconnections to this unit. Turn on this unit. If recording to DVD, insert a disc that you use for recording (¼ 16, 77). Confirm that the clock on the unit’s display is set to the correct time.STATUSCREATECHAPTERRETURNPLAY/x1.3PAUSESTOPSLOW/SEARCHSKIPCHSELECTINPUT0987654321AVAATVDRIVESELECTDELETEMANUAL SKIPAUDIO DISPLAYVIDEO Plus+EXITTIME SLIPOKOPTIONPROG/CHECKFUNCTIONMENUDIRECTNAVAIGATAORCHVOL[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]You can enter up to 32 programmes up to a month in advance.(Each daily or weekly programme is counted as one programme.)Tips [RAM] [-RW‹V›] [+R] [+RW]To use a new disc, formatting isnecessary. To check programmes (¼ 32) To deactivate timer programme(e.g. to interrupt a daily or weeklytimer programming) (¼ 32) To delete programmes (¼ 32) Notes on timer recording (¼ 33) When “-- ---” appears in the“Channel” column (¼ 15)VIDEO Plus+Input PlusCode Number 09, and press OK.VIDEO Plus+Record 1:58 SPDVD30:24 SPRemain HDD WED 23/04/08 12:53:00– The VIDEO Plus+ screen appears.Enter the PlusCode number with the numberedbuttons.– Press [] to move back to correct a digit.OKConfirm the programme (start and end time) byTV magazine, etc. and correct if necessary using, , , , then OKNo. ChannelBBC 1 1501Timer icon– The settings are stored and the timer programme is on.– The timer icon is displayed.– “” lights on the unit’s display to indicate timer recording standby has been activated.– Repeat steps – to programme other recordings.– Press [] to turn the unit off.Using VIDEO Plus+ systemEntering PlusCode numbers is an easy way of timer recording. You can findthese numbers in TV listings in newspapers and magazines. Using PlusCode numbers for digital satellite stationsSet this unit to recognise PlusCode numbers for digital satellite stations beforeyou start the following operations (¼ 15, VIDEO Plus+ system setting fordigital satellite stations (Memorizing the Plus Code number).You can also record programmes from digital satellite receiver byRGB signals.Preparation: Set “AV2 Input” to “RGB/Video” or “RGB” (¼ 71). Set your Sky Digital STB to output “RGB” signals.