Panasonic Diga DMR-EH59EM Operating Instructions Manual

Contents

89RQT9272 ReferenceCannot record.Cannot copy. You haven’t inserted a disc or the disc you inserted cannot be recordedon. Insert a disc the unit can record onto.16 [RAM] [-RW‹V›] [+R] [+R]DL] [+RW] The disc is unformatted. Format the disc. 64 The write-protect tab on the cartridge is set to “PROTECT” or the disc isprotected with the “DVD Management” settings.64 Some programmes have limitations on the number of times they can berecorded (CPRM).25, 92 The disc is full or nearly full. Delete unneeded titles ([HDD] [RAM][-RW‹V›] [+RW]) or use another disc.24, 44,64 You cannot directly record to a DVD-R DL or +R DL disc on this unit.Record to the HDD and then copy to the disc.− Video cannot be recorded onto a DVD-R with still images recorded on it. − [-R]DL] [+R]DL] In the following situations, you cannot copy. Deleteunnecessary titles from the HDD and then copy.– If there is not enough space available on the HDD (If you will copy titlesfrom the HDD to a blank disc and fill the entire disc, HDD disc spaceequivalent to 4 hours of SP mode recording is necessary).– If the number of recorded titles and the number of titles to be copied hasexceeded 499.24, 44,64 You cannot record and copy on finalised DVD-R, DVD-R DL, DVD-RW(DVD-Video format), +R, +R DL discs. However, you can record and copyagain if you format DVD-RW.− If you repeatedly insert discs or turn the unit on and off about 50 timesor more, the recording or editing of DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL, and +RW discs may be disabled.− DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RWdiscs recorded on this unit may not be recordable on other PanasonicDVD Recorders.− This unit cannot record NTSC signals to discs that already have PALsignal recordings.(However, both types of programmes can be recorded onto the HDD.)Play of discs recorded with both PAL and NTSC on another unit is notguaranteed.71 Some broadcasts are copyright protected. 16, 25,92Timer recording does not workproperly. The timer programme is incorrect or different timer programme timesoverlap. Correct the programme.32 The programme is not in timer recording standby. (“” in the timerrecording list is not on.)321 Press [PROG/CHECK].2 Press [, ] to select the programme, then press the “Red” button. The clock is not correct. Set the clock. 14Timer recording does not stop evenwhen [] is pressed. When using the linked timer recording with external equipment, press[EXT LINK]. (“EXT-L” on the unit’s display disappears.)29 If you start recording immediately after turning on the unit while “PowerSave” is set to “Off”, you cannot then stop recording for a few seconds.−The timer programme remainseven after recording finishes. The timer programme remains if set to daily or weekly. 31, 32(Continued on the next page)Recording Issues Recording/Timer Recording/Copying/External input PagePlayback Issues Operation (Continued) PagePicture stops.  Picture may stop if the DivX files are greater than 2 GB. (DivX) −Cannot see the beginning of thetitle played. (If connecting to a TV that supports VIERA Link with an HDMI cable)When [ PLAY] is pressed on this unit’s remote control, you may not beable to see the beginning of the title played until the picture is displayed onthe TV. Using [], return to the beginning of the title.−