Panasonic Diga DMR-EH59EM Operating Instructions Manual

Contents

67RQT9272To change the tuning settings for individualprogramme positionManual TuningPos Channel CH Pos Channel CHDeleteAddMove1 BBC1 42 BBC2 23 1TV 54 CH4 85 CH5 1067891011121314151617181920OK RETURNSELECTPosChannelCHNICAM14AutoRETURN : leaveManualTuning BBCTitle Page 301RETURNSELECT1. Press [, , , ] to select a programmeposition, then press [OK].2. Press [, ] to select an item, then press [].Pos To change the programme position in whichthe TV stations are assignedPress [, ] or numbered buttons to select thenumber of the desired programme position, thenpress [OK].Channel To enter or change the Channel of a TV stationPress [, , , ] to enter station name, thenpress [OK].If the Channel needs a blank space, select theblank between “Z” and “”.CH To enter newly available TV stations or changethe CH number of an already tuned TV stationPress [, ] or the numbered buttons to enter theCH number of the desired TV station.Wait a few moments until the desired TV stationhas been tuned.After the desired TV station is tuned, press [OK].NICAM To select the type of sound to be recordedPress [, ] to select “Auto”, then press [OK]. Select “Off” if you want to record the normal(mono) sound during a stereo, bilingual orNICAM broadcast, or if the stereo sound isdistorted due to inferior reception conditions.Title Page To enter the Teletext title page for a channelEntering title page number allows the unit toautomatically record programme and channels.Press [, ] or numbered buttons to enter thenumber, then press [OK]. To find the correct title page for the station, referto its Teletext TV guide. The unit’s clock must be set correctly.Auto-Setup RestartDownload from TVYou can restart auto channel setting if setup (¼ 13) fails forsome reason.Select “Download from TV” when you connect the unit to a QLink compatible TV with a fully wired 21-pin Scart cable or aVIERA Link (HDAVI Control 3 or later) compatible TV with aHDMI cable.(Programme positions are downloaded from the TV for thechannels in this unit’s channel coverage and copied throughthis convenient function.)When the confirmation screen appearsPress [] to select “Yes”, then press [OK].Notes If you perform “Auto-Setup Restart”, all stored tuningdata are deleted. If you perform “Download from TV”, all currently storedstations will be replaced by new ones.Tips You can also use the following method to restart Auto-Setup. (All the settings except for the ratings level,ratings password, Owner ID and Clock return to thefactory preset. The timer recording programmes arealso cancelled.)When the unit is turned on and stopped, pressand hold [CH ] and [CH ] on the main unitsimultaneously for about 5 seconds.– Auto-Setup screen appears. You can make the setting of “Title Page” (Auto/Off) by selectingthe external input channel (AV1, AV2, AV3) in step 1 (¼ above).Setting Menus