KW2G / KW2G-H Eco-POWER METER102Data item(MEWTOCOL) Name Unit Kind of data Range: Hexadecimal(Range: Decimal)MODBUSFunctioncode0454H(DT01108)【E1】 CH0Max. counting speed Hz Unsigned 16bit C350H (50000) , 1EH (30) 03H/06H/10H0455H(DT01109)【E1】 CH1Max. counting speed Hz Unsigned 16bit C350H (50000) , 1EH (30) 03H/06H/10H0456H(DT01110) 【E1】 CH0 Scaling max. － Signed 32bit FF0BDC1H to F423FH(-999999 to 999999)03H/06H/10H0457H(DT01111)0458H(DT01112) 【E1】 CH1 Scaling max. － Signed 32bit FF0BDC1H to F423FH(-999999 to 999999)03H/06H/10H0459H(DT01113)045AH(DT01114) 【E1】 CH0 Scaling min. － Signed 32bit FF0BDC1H to F423FH(-999999 to 999999)03H/06H/10H045BH(DT01115)045CH(DT01116) 【E1】 CH1 Scaling min. － Signed 32bit FF0BDC1H to F423FH(-999999 to 999999)03H/06H/10H045DH(DT01117)045EH(DT01118) 【E1】 CH0 Point position － Unsigned 32bit1H(1)<1>, AH(10)>0.1>,64H(100)<0.01>,3E8H(1000)<0.001>,2710H(10000)<0.0001>03H/06H/10H045FH(DT01119)0460H(DT01120) 【E1】 CH1 point position － Unsigned 32bit1H(1)<1>, AH(10)>0.1>,64H(100)<0.01>,3E8H(1000)<0.001>,2710H(10000)<0.0001>03H/06H/10H0461H(DT01121)0462H(DT01122)【E1】CH0 Input range － Unsigned 16bit 0H(0)<0-5V>, 1H(1)<1-5V>,2H(2)<0-20mA>,3H(3)<4-20mA>03H/06H/10H0463H(DT01123)【E1】CH1 Input range － Unsigned 16bit 0H(0)<0-5V>, 1H(1)<1-5V>,2H(2)<0-20mA>,3H(3)<4-20mA>03H/06H/10H0464H(DT01124)【E1】 CH0Shift average frequency － Unsigned 16bit 0H(0),2H(2),4H(4),8H(8),10H(16)03H/06H/10H0465H(DT01125)【E1】 CH1Shift average frequency － Unsigned 16bit 0H(0),2H(2),4H(4),8H(8),10H(16)03H/06H/10H0467H(DT01127)【E1】Unit forPulse output－ Unsigned 32bit1H(1)<0.001>, AH(10)<0.01>,64H(100)<0.1>,3E8H(1000)<1>,2710H(10000)<10>,186A0H(100000)<100>,3E7H(999)378H(888)309H(777)< Ratio for current alarm>22BH(555)< Preset value for output>14DH(333)< Ratio and time for Stand-by alarm>6FH(111)03H/06H/10H0468H(DT01128)0469H(DT01129)【E1】Pulse output width － Unsigned 16bit 1H to 64H (1 to 100) 03H/06H/10H046AH(DT01130)【E1】Power alarm value(Instantaneouselectric power)0.01kW Unsigned 32bit 0H to F423FH (0 to 999999) 03H/06H/10H046BH(DT01131)046CH(DT01132)【E1】Ratio for current alarm 0.1％ Unsigned 16bit 1H to 3E8H (1 to 1000) 03H/06H/10H046DH(DT01133)【E1】Ratio for stand-by current 0.1% Unsigned 16bit 1H to 3E8H (1 to 1000) 03H/06H/10H046EH(DT01134)【E1】Time for stand-by alarm 1min Unsigned 16bit 0H to 270FH (0 to 9999) 03H/06H/10H
