KW2G-H Eco-POWER METER54◇How to write data of the 1 day (fig.1) (fig.2)(1) Set ‘ON’ for file type to save with saved file typeselection mode (mode 4).(Available only type 1 and type 2)(2) Shift to display ‘Daily integrated electric power’ in optionmode. (fig.1)(3) Select date to write.(4) Insert SD memory card.(5) It writes the measuring data of the displayed month withfile type set to ‘ON’. In case that you’d like to write data of 10 March:(1) Shift to the display on the right (upper: D10) by using and - △>.(2) Insert SD memory card.(3) It writes the data of 10 March.Be sure to insert the direction of SD memory card correctly.When it is inserted wrong direction, the unit or memory card may be damaged.Do not move the inserted memory card, or the unit or memory card may be damaged.Do not insert an unsupported memory card.After writing data and removing SD memory card, insert a dummy card to protect in order toavoid dust or something else.Do not turn off the power during inserting SD memory card, or the unit or memory card may bedamaged.‘SD ACCESS’ is displayed during writing.After completing the writing, shift to monitor display.When there isn’t enough capacity in SD memory card or SD memory card is unwritable, error displaywill appear alternately.During writing Display of writing errorAlternately
