【KW2G-H (SD card type)】Basic setting to measure by KW2G-H Eco-POWER METERWhen wiring the main unit and the current transformer (CT) and setting the basic setting after power on,you can measure the powerThe basic setting of MODE1 is necessary to measure.In order to use the other functions, the settings of the each parameter are necessary.*Be sure to set calendar timer (clock) andinitialize memory of main unit before measuring.After measuring,insertSD memory cardCheck log datawith option modeCheck alarmoutputCheck measureddata viacommunicationdeviceWhat to doMeasure PowerMount / Connection SettingsCount pulseoutput fromother deviceOutput AlarmLog dataRead outlog dataWire the main unitConnect the current transformer (CT)Wire outputlineCollect datavia RS485PrepareSD memorycardWirecommunicationlineWire inputlinePower on the main unitSet calendar timer and initialize memory of main unit (＊) (MODE4･5)Set the parameter forpulse measurementSet logsetting(MODE4)Check measureddata with powermonitoring modeSet alarmoutput(MODE1)Check count valuewith powermonitoring modeSetcommunicationsetting(MODE3)Set the basic settings (MODE1)Set logsetting(MODE4)p.33p.44p.33p.42p.44p.44How to use6.26.26.45.25.5733333Updatethe firmwareCheckthe softwareversion4.3.4Check how toupdate8p.41
