KW2G / KW2G-H Eco-POWER METER746.3.3 Current・It displays the current value.・Press - △> continuously to shift the display.*When the display is different from the measured load system, set to the correct system at the settingmode. (Refer to 4.2.1 Phase/wire setting mode.)Example of 1P2WR(1)-current (A) R(2)-current (A)Example of 1P3WR-current (A) N-current (A) T-current (A)Example of 3P3WR-current (A) S-current (A) T-current (A)・When input current exceeds 150%F.S. at each range, 「 ‐ ‐ ‐ ‐ ‐ ‐」 will be displayed.・Current measurement partsEco-POWER METER measures the current as below.DisplaySystem 1.R-A / R-A N-A / S-A 2.R-A / T-ASingle-phase two-wire system R-current (1) ― R-current (2)Single-phase three-wire system R-current N-current T-currentThree-phase three-wire system R-current S-current T-currentcontinuouslycontinuously continuouslycontinuously continuously
