KW2G/ KW2G-H Eco-POWER METER505.4 General-purpose output functionUsing this general-purpose output function, it turns on or off the output by writing 0 (OFF) or 1(ON) tothe designated data register via communication. When it turns on, data register is started with 0 (OFF).*It doesn’t work with the on-time and off-time set to under 0.1s.●Operation mode・Level outputWhen the designated data register is 1(ON), it turns on the output.When the designated data register is 0(OFF), it turns off the output.・Repeat cycle outputWhen the designated data register is 1(ON), it starts a repeat cycle operation.During a repeat cycle operation, it repeats on and off according to the setting output ON-time (t1)and output OFF-time (t2).・One-shot outputWhen the designated data register is 1(ON), it turns on the output.After passing the setting output ON-time (t1), the data register will be 0 (OFF) and it will turn offthe output. Even if it writes 1(ON) before passing the setting output ON-time, it rejects the writing.(It doesn’t reset the setting ON-time.)
