2 Tap [Access Point Settings] and select the desired access point.3 Tap [System] ® [Firmware Update].R Your device will connect to the Internet and check for a newer version of its firmware.4 Follow the on-screen instructions.Notification settingsYou can select which types of status notifications are displayed, and which are not.Important:R In order to receive notifications, your mobile device must be connected to the Internet. If your mobiledevice is not connected to a wireless network, a mobile network connection is required.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Access Point Settings] and select the desired access point.3 Tap [Notification].4 Select the desired settings.– [Recording Error]: Determines whether a notification is displayed when a recording error occurs.– [Mode Change]: Determines whether a notification is displayed when a mode is changed.Login settingsConfiguring automatic loginYou can specify whether or not you must enter a login password in order to connect to your devices whileaway from home.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Access Point Settings] and select the desired access point.3 Tap [Login Settings] ® [Automatic Login].4 To disable automatic login:Slide the switch to the off position.To enable automatic login:Slide the switch to the on position, enter the password and then tap [OK].R To display the characters that you have entered, turn on the [Show Password] checkbox.Changing the login passwordYou can change the login password used in order to connect to your devices while away from home.1 From the [HomeHawk] app home screen, tap ® [Settings].2 Tap [Access Point Settings] and select the desired access point.3 Tap [Login Settings] ® [Change Login Password].4 Enter the new password.R To display the characters that you have entered, turn on the [Show Password] checkbox.5 Tap [OK].103Using a front door camera and outdoor camera
