Live images are being viewed or recorded, or camera is starting upDevice malfunction*1 You can configure the camera so that its LED indicator does not light during normal operation orwhen motion is detected. See “Enabling and disabling the HD camera’s LED indicator”, Page 120.Enabling and disabling the HD camera’s LED indicator1 View live images from the desired camera.2 Open the options menu (see “Displaying the options menu”, Page 111).3 Tap [Settings] ® [Device Profiles].4 Slide the [Camera LED] switch to the desired position.Smart recording featuresSmart recording features (overview)Smart recording allows the HD camera to start recording images automatically. You can configure smartrecording settings by creating “scenarios”. Each scenario answers the following two questions.1 What is the trigger that will make the camera start recording?– A schedule– A sensor2 How long should the camera record images?– Maximum 15 minutesSensors that can be used to trigger smart recording scenarios– Built-in motion sensor in HD camera– Built-in sound sensor in HD camera– Built-in temperature sensor in HD cameraCreating smart recording scenariosSmart recording scenarios can be executed on a schedule and when a sensor is triggered.Note:R 10 smart recording scenarios can be created for each camera.Creating a scenario that uses a schedule as the trigger1 View live images from the desired camera.2 Open the options menu (see “Displaying the options menu”, Page 111).3 Tap [Smart Recording].R A list of existing scenarios is displayed.4 Tap .120Using an HD camera
