Checking the selected modeThe name of the selected mode is displayed next to the name of access points in the home screen( “Front door camera and outdoor camera home screen”, Page 21).Accessing the mode screenThe mode screen can be accessed by tapping the mode icon displayed next to the name of accesspoints in the home screen ( “Front door camera and outdoor camera home screen”, Page 21).Selecting modes1 Access the mode screen ( “Accessing the mode screen”, Page 92).2 Select the desired mode.Turning modes offIf you don’t want to receive notifications, record images, or have the camera make sounds when motionis detected by a camera, you can turn off modes by selecting [Basic Mode].1 Access the mode screen ( “Accessing the mode screen”, Page 92).2 Tap [Basic Mode].Preset modesThere are 3 preset modes that can be used for front door cameras and outdoor cameras: [Basic Mode],[Silent Mode], and [Protection Mode].– [Basic Mode]:Use this if you don't want to receive notifications, record images, or have the camera make soundswhen motion is detected.– [Silent Mode]:Use this if you want to receive notifications, record images, but not have the camera make soundswhen motion is detected.– [Protection Mode]:Use this if you want to receive notifications, record images, and have the camera make sounds whenmotion is detected.The following table describes the settings for [Silent Mode] and [Protection Mode].Setting[Silent Mode] [Protection Mode]1st camera 2nd or latercamera 1st camera 2nd or latercameraRecording On On On On[Recording Duration] [10 sec] [10 sec] [10 sec] [10 sec][Sync]*1 Off Off Off OffPush Notification On On On On92Using a front door camera and outdoor camera