3 Tap [Video].4 Slide the [Upside Down] switch to the desired position.Talking to the cameraYou can use your mobile device’s microphone and the camera’s built-in speaker to talk to someonewhere the camera is installed. You can either tap and hold to talk or tap once to talk alternativelywith the other party.Tap and hold to talk1 View live images from the desired camera.2 Tap and hold .R The audio from your mobile device’s microphone is played through the camera’s speaker until yourelease your finger.R Talk in turns with the other party. (While you are talking to the camera, you will not be able to hearaudio from the camera’s microphone.)Tap and talk1 View live images from the desired camera.2 Tap .R Talk in turns with the other party.3 When finished, tap again.Note:R For information about adjusting the camera’s speaker volume, see “Adjusting the talk volume”,Page 70.Playing back recordings1 From the [HomeHawk] app home screen, tap ® [Recording List].2 Select the desired camera.3 Tap or to select a recording date.R A list of all recordings recorded on the selected date is displayed.R Tap to display recordings in a timeline. Tap to display recordings in a list.R The icons displayed indicate details about each recording.The recording was recorded manually.The recording was recorded when a sensor was triggered.The recording was recorded with the sound muted by the recording settings ( “Recordingsound”, Page 71).4 Select a recording.R The selected recording starts playing in the playback screen.49Using a shelf camera and floor camera