7.10.2 Utility—Automatic Two-way Recording—Extension SettingSpecify the Automatic Two-way Recording settings for each supervisor. These settings may be changed by aprogrammer with a User (Administrator) account.1. From the Select a Supervisor drop-down list, select a supervisor (specified in 7.10.1 Utility—AutomaticTwo-way Recording—Supervisor Setting).2. In UM Group Destination Mailbox specify the mailbox where the Automatic Two-way Recording data willbe sent. Select Add New Mailbox and specify a new mailbox number, or select an existing mailbox fromthe Select Mailbox drop-down list.3. Select a UM group from the Assign a Destination UM-Group No. drop-down list to specify the UM Groupof the mailbox specified in 2.4. In What type of calls to record, check the boxes to specify if internal calls, external calls, and/or callsmade to an incoming call distribution group will be recorded to the mailbox.5. In Select User Extensions, click Add.6. Select the check boxes for the agent extensions that the supervisor will control, and then click OK.7. Click List View to confirm the current Automatic Two-way Recording settings for each supervisedextension.8. Click OK when you have finished configuring settings and adding agent extensions for a supervisor.Once these settings have been configured, supervisors can change settings for agent extensions they havebeen assigned in 8.3.1 Users—Automatic Two-way Recording—Edit a Recording.152 PC Programming Manual7.10.2 Utility—Automatic Two-way Recording—Extension Setting
